You are here

Doru Stefanescu

  • Faculty Emeritus, Materials Science Engineering
  • 2041 College Rd
    Columbus, OH 43210
  • 614-292-5629

Honors

  • 2012

    The John Campbell Medal. .

  • 2012

    Doctor Honoris Causa. .

  • 2012

    Honorary Member. .

  • 2012

    Best Paper Award. .

  • 2011

    The Joseph Seaman Gold Medal. .

  • 2011

    Special Merit Award - Honorary Lecture. .

  • 2009

    Lumley Research Award. .

  • 2006

    Honorary Professor. .

  • 2001

    Best Paper Awards. .

  • 2001

    Best Paper Award. .

  • 2001

    Doctor Honoris Causa. .

  • 2000

    Award of Scientific Merit/AFS Alumnus. .

  • 1998

    Doctor Honoris Causa. .

  • 1997

    The Moody Blackmon Outstanding Professor Award. .

  • 1997

    Best Paper Award. .

  • 1997

    Fellow ASM International. .

  • 1990

    The Burnum Distinguished Faculty Award. .

  • 1989

    Burlington Northern Foundation Faculty Achievement Award. .

  • 1989

    Certificate of recognition for the creative development of a technical innovation. .

  • 1988

    Best Paper Award. .

  • 1984-1986

    University Research Fellow. .

  • 1985

    NASA Certificate for the creative development of a technical innovation. .

Books

2009

  • Doru M.Stefanescu. 2009. "Science and Engineering of Casting Solidification." New York: Springer.

1978

  • L. Sofroni, D.M. Stefanescu. 1978. "Fonta cu grafit nodular (Spheroidal Graphite Cast Iron)." Bucharest: Editura Tehnica.

1974

  • L. Sofroni, D.M. Stefanescu. 1974. "Fonte speciale (Special Cast Irons)." Bucuresti: Editura Tehnica.

1972

  • C. Stefanescu, D.M. Stefanescu. 1972. "Indreptar pentru turnatori (Foundrymen's Handbook)." Bucharest: Editura Tehnica.

1971

  • L. Sofroni, D.M. Stefanescu. 1971. "Fonte modificate (Inoculated Cast Iron)." Bucharest: Editura Tehnica.

Edited Books

2007

  • multiple. 2007. "Special Issue on Solidification Science and Processing." unknown: Trans. of the Indian Inst. of Metals (2007).

2003

  • various. 2003. "Modeling of Casting, Welding, and Advanced Solidification Processes – X." Warrendale PA: TMS.

2001

  • various. 2001. "Proceedings of the International Conference on the Science of Casting and Solidification." Brasov: Lux Libris.

1999

  • various. 1999. "Proceedings of the Sixth International Symposium on the Science and Processing of Cast Iron, Part One." London: International Journal of Cast Metals Research.
  • various. 1999. "Proceedings of the Sixth International Symposium on the Science and Processing of Cast Iron, Part Two." London: International Journal of Cast Metals Research.

1996

  • various. 1996. "Solidification Science and Processing." Tokyo: Jap. Inst. of Metals.

1993

  • various. 1993. "Cast Metal Matrix Composites, Proceedings of the 2nd International Conference." Des Plaines, IL: AFS.

1988

  • various. 1988. "Metals Handbook vol. 15, Casting, 9th ed.." Materials Park OH: ASM International.
  • various. 1988. "Solidification Processing of Eutectic Alloys." Warrendale PA: TMS.

Journal Articles

2014

  • Alonso,G; Stefanescu,D,M; Suarez,R; Loizaga,A; Zarrabeitia,G, 2014, "Kinetics of graphite expansion during eutectic solidification of cast iron." INTERNATIONAL JOURNAL OF CAST METALS RESEARCH 27, no. 2, 87 - 100.

2013

  • E. Moumeni, D.M. Stefanescu, N.S. Tiedje, P. Larrañaga, J.H. Hattel, 2013, "Investigation on the Effect of Sulfur and Titanium on the Microstructure of Lamellar Graphite Iron." Metallurgical and Materials Trans. 44A, 5134 - 5146.
  • Moumeni,Elham; Stefanescu,Doru,Michael; Tiedje,Niels,Skat; Larranaga,Pello; Hattel,Jesper,Henri, 2013, "Investigation on the Effect of Sulfur and Titanium on the Microstructure of Lamellar Graphite Iron." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 44A, no. 11, 5134 - 5146.
  • Boonmee S., Stefanescu D.M., 2013, "Casting Skin Management in Compacted Graphite Iron - Part I: Effect of Mold Coating and Section Thickness." Transactions of the American Foundry Society 121, 13 - 091.
  • Boonmee,S; Stefanescu,D, 2013, "EFFECT OF CASTING SKIN ON FATIGUE PROPERTIES OF CG IRON." INTERNATIONAL JOURNAL OF METALCASTING 7, no. 2, 15 - 26.

2011

  • Boonmee,S; Moran,M,K; Stefanescu,D,M, 2011, "On the Effect of the Casting Skin on the Fatigue Properties of CG Iron." TRANSACTIONS OF THE AMERICAN FOUNDRY SOCIETY, VOL 119 119, 421 - 430.
  • Boonmee,Sarum; Stefanescu,Doru,M, 2011, "The Mechanism of Formation of Casting Skin in CG Iron and its Effect on Tensile Properties." SCIENCE AND PROCESSING OF CAST IRON IX 457, 11 - 16.
  • Stefanescu,D,M; Catalina,A,V, 2011, "Physics of microporosity formation in casting alloys - sensitivity analysis for Al-Si alloys." INTERNATIONAL JOURNAL OF CAST METALS RESEARCH 24, no. 3-4, 144 - 150.
  • Boonmee,S; Moran,M,K; Stefanescu,D,M, 2011, "On the Effect of the Casting Skin on the Fatigue Properties of CG Iron." TRANSACTIONS OF THE AMERICAN FOUNDRY SOCIETY, VOL 119 119, 421 - 430.

2010

  • Boonmee,S; Gyesi,B; Stefanescu,D,M, 2010, "Casting Skin of Compacted Graphite Iron Part I: Evaluation and Mechanism of Formation." TRANSACTIONS OF THE AMERICAN FOUNDRY SOCIETY, VOL 118 118, 205 - 216.
  • Boonmee,S; Stefanescu,D,M, 2010, "Casting Skin of Compacted Graphite Iron Part II: Influence on Tensile Mechanical Properties." TRANSACTIONS OF THE AMERICAN FOUNDRY SOCIETY, VOL 118 118, 217 - 224.

2009

  • Boonmee,S; Stefanescu,D, 2009, "ON THE MECHANISM OF CASTING SKIN FORMATION IN COMPACTED GRAPHITE CAST IRON." INTERNATIONAL JOURNAL OF METALCASTING 3, no. 4, 19 - 24.
  • Stefanescu,D,M, 2009, "MOLD/METAL INTERFACE PHENOMENA AND CONTROL IN CAST FERROUS ALLOYS." METALURGIA INTERNATIONAL 14, 5 - 12.
  • Stefanescu,D,M; Wills,S; Massone,J; Duncan,F, 2009, "Quantification of Casting Skin in Ductile and Compacted Graphite Irons and Its Effect on Tensile Properties." TRANSACTIONS OF THE AMERICAN FOUNDRY SOCIETY, VOL 117 117, 587 - 606.

2008

  • Stefanescu,D; Wills,S; Massone,J; Duncan,F, 2008, "QUANTIFICATION OF CASTING SKIN IN DUCTILE AND COMPACTED GRAPHITE IRONS AND ITS EFFECT ON TENSILE PROPERTIES." INTERNATIONAL JOURNAL OF METALCASTING 2, no. 4, 7 - 28.

2007

  • Stefanescu,Doru,M, 2007, "The Multidisciplinary Facets of Particle Engulfment and Pushing." TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS 60, no. 2-3, 79 - 86.
  • Stefanescu,D,M, 2007, "30 years of modeling of microstructure evolution during casting solidification." MATERIALS AND TECHNOLOGIES 23, 9 - 16.

2006

  • Stefanescu,Doru,M, 2006, "Microstructure evolution during the solidification of steel." ISIJ INTERNATIONAL 46, no. 6, 786 - 794.

2005

  • Stefanescu,D,M, 2005, "Discussion on 'new method for rapid evaluation of spheroidisation and inoculation grade of hypereutectic cast iron'." INTERNATIONAL JOURNAL OF CAST METALS RESEARCH 18, no. 1, 63 - 64.

2004

  • Catalina,A,V; Stefanescu,D,M; Sen,S; Kaukler,W,F, 2004, "Interaction of porosity with a planar solid/liquid interface." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 35A, no. 5, 1525 - 1538.
  • Mukherjee,S; Sharif,M,AR; Stefanescu,D,M, 2004, "Liquid convection effects on the pushing-engulfment transition of insoluble particles by a solidifying interface: Part II. Numerical calculation of drag and lift forces on a particle in parabolic shear flow." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 35A, no. 2, 623 - 629.
  • Mukherjee,S; Stefanescu,D,M, 2004, "Liquid convection effects on the pushing-engulfment transition of insoluble particles by a solidifying interface: Part I. Analytical calculation of the lift forces." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 35A, no. 2, 613 - 621.

2003

  • Catalina,A,V; Sen,S; Stefanescu,D,M, 2003, "A new analytical approach to predict spacing selection in lamellar and rod eutectic systems." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 34, no. 2, 383 - 394.

2001

  • Yang,B,J; Stefanescu,D,M; Leon-Torres,J, 2001, "Modeling of microstructural evolution with tracking of equiaxed grain movement for multicomponent Al-Si alloy." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 32, no. 12, 3065 - 3076.

2000

  • Catalina,A,V; Mukherjee,S; Stefanescu,D,M, 2000, "A dynamic model for the interaction between a solid particle and an advancing solid/liquid interface." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 31, no. 10, 2559 - 2568.
  • Stefanescu,D,M; Catalina,A; Sen,S; Juretzko,F,R; Dhindaw,B,K; Curreri,P,A, 2000, "Further discussion of "Particle engulfment and pushing by solidifying interfaces: Part II. Microgravity experiments and theoretical analysis" - Authors' reply." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 31, no. 6, 1700 - 1704.

1999

  • Yang,B,J; Leon-Torres,J; Stefanescu,D,M, 1999, "A model for equiaxed eutectic solidification with melt convection and solid-phase transport." INTERNATIONAL JOURNAL OF CAST METALS RESEARCH 11, no. 6, 527 - 532.
  • Sen,S; Juretzko,F; Stefanescu,D,M; Dhindaw,B,K; Curreri,P,A, 1999, "In situ observations of interaction between particulate agglomerates and an advancing planar solid liquid interface: microgravity experiments." JOURNAL OF CRYSTAL GROWTH 204, no. 1-2, 238 - 242.
  • Stefanescu,D,M; Juretzko,F,R; Catalina,A; Dhindaw,B,K; Sen,S; Curreri,P,A, 1999, "Particle engulfment and pushing by solidifying interfaces: Part II. Microgravity experiments and theoretical analysis - Discussion - Reply." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 30, no. 7, 1890 - 1894.

1998

  • Juretzko,F,R; Dhindaw,B,K; Stefanescu,D,M; Sen,S; Curreri,P,A, 1998, "Particle engulfment and pushing by solidifying interfaces: Part I. Ground experiments." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 29, no. 6, 1691 - 1696.
  • Stefanescu,D,M; Juretzko,F,R; Dhindaw,B,K; Catalina,A; Sen,S; Curreri,P,A, 1998, "Particle engulfment and pushing by solidifying interfaces: Part II. Microgravity experiments and theoretical analysis." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 29, no. 6, 1697 - 1706.
  • Stefanescu,D,M; Catalina,A,V, 1998, "Calculation of the critical velocity for the pushing/engulfment transition of nonmetallic inclusions in steel." ISIJ INTERNATIONAL 38, no. 5, 503 - 505.

1997

  • Nastac,L; Stefanescu,D,M, 1997, "Computational modeling of NbC/Laves formation in INCONEL 718 equiaxed castings." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 28, no. 7, 1582 - 1587.
  • Sen,S; Dhindaw,B,K; Stefanescu,D,M; Catalina,A; Curreri,P,A, 1997, "Melt convection effects on the critical velocity of particle engulfment." JOURNAL OF CRYSTAL GROWTH 173, no. 3-4, 574 - 584.
  • Sen,S; Kaukler,W,F; CURRERI,P; Stefanescu,D,M, 1997, "Dynamics of solid/liquid interface shape evolution near an insoluble particle - An X-ray transmission microscopy investigation." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 28, no. 10, 2129 - 2135.
  • Nastac,L; Stefanescu,D,M, 1997, "Stochastic modelling of microstructure formation in solidification processes." MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING 5, no. 4, 391 - 420.

1996

  • Nastac,L; Stefanescu,D,M, 1996, "Macrotransport-solidification kinetics modeling of equiaxed dendritic growth .1. Model development and discussion." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 27, no. 12, 4061 - 4074.
  • Chang,S; Stefanescu,D,M, 1996, "A model for macrosegregation and its application to Al-Cu castings." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 27, no. 9, 2708 - 2721.
  • Catalina,A,V; Stefanescu,D,M, 1996, "Lamellar growth of eutectic equiaxed grains." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 27, no. 12, 4205 - 4210.
  • Nastac,L; Stefanescu,D,M, 1996, "Macrotransport-solidification kinetics modeling of equiaxed dendritic growth .2. Computation problems and validation on INCONEL 718 superalloy castings." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 27, no. 12, 4075 - 4083.
  • Chang,S; Stefanescu,D,M, 1996, "A model for inverse segregation: The case of directionally solidified Al-Cu alloys." ACTA MATERIALIA 44, no. 6, 2227 - 2235.

1995

  • Stefanescu,D,M; PHALNIKAR,R,V; Pang,H,T; Ahuja,S; Dhindaw,B,K, 1995, "A COUPLED FORCE FIELD-THERMAL FIELD ANALYTICAL MODEL FOR THE EVALUATION OF THE CRITICAL VELOCITY FOR PARTICLE ENGULFMENT." ISIJ INTERNATIONAL 35, no. 6, 700 - 707.

1994

  • Sen,S; Stefanescu,D,M; Dhindaw,B,K, 1994, "MELT-PROCESSED NI3AL MATRIX COMPOSITES REINFORCED WITH TIC PARTICLES." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 25, no. 11, 2525 - 2534.
  • Sen,S; Dhindaw,B,K; Stefanescu,D,M; Shamsuzzoha,M, 1994, "EVALUATION OF INTERFACE STABILITY AND MELT-PROCESSING TECHNIQUES OF NI3AL/SIC PARTICULATE COMPOSITES." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 174, no. 2, 207 - 216.

1993

  • Nastac,L; Stefanescu,D,M, 1993, "AN ANALYTICAL MODEL FOR SOLUTE REDISTRIBUTION DURING SOLIDIFICATION OF PLANAR, COLUMNAR, OR EQUIAXED MORPHOLOGY." METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 24, no. 9, 2107 - 2118.

1992

  • Nastac,L; Chang,S; Stefanescu,D,M; Hadji,L, 1992, "A MODEL FOR MICROSEGREGATION IN MULTICOMPONENT SYSTEMS SOLIDIFYING WITH EQUIAXED MORPHOLOGY." MICROSTRUCTURAL DESIGN BY SOLIDIFICATION PROCESSING 10, 57 - 75.
  • Tian,H,M; Stefanescu,D,M, 1992, "APPLICATION OF A COLORATION ETCHING METHOD TO THE STUDY OF MICROSTRUCTURES IN PRIMARY AND EUTECTIC SOLIDIFICATION IN CAST IRONS." MATERIALS CHARACTERIZATION 29, no. 3, 329 - 333.
  • Tian,H,M; Stefanescu,D,M, 1992, "DENDRITIC GROWTH DURING DIRECTIONAL SOLIDIFICATION OF HYPOEUTECTIC FE-C-SI ALLOYS." METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 23, no. 2, 681 - 687.
  • Chang,S; Shangguan,D; Stefanescu,D,M, 1992, "MODELING OF THE LIQUID SOLID AND THE EUTECTOID PHASE-TRANSFORMATIONS IN SPHEROIDAL GRAPHITE CAST-IRON." METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 23, no. 4, 1333 - 1346.
  • Upadhya,G; Stefanescu,D,M, 1992, "MODELING OF THE CRYSTALLINE-TO-AMORPHOUS TRANSITION IN RAPIDLY SOLIDIFIED ALLOYS." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 158, no. 2, 215 - 226.
  • Stefanescu,D,M; Dhindaw,B,K; Ahuja,S, 1992, "BEHAVIOR OF CERAMIC PARTICLES AT THE SOLID-LIQUID INTERFACE IN METAL MATRIX COMPOSITES - REPLY." METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 23, no. 8, 2328 - 2330.
  • Shangguan,D; Ahuja,S; Stefanescu,D,M, 1992, "AN ANALYTICAL MODEL FOR THE INTERACTION BETWEEN AN INSOLUBLE PARTICLE AND AN ADVANCING SOLID LIQUID INTERFACE." METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 23, no. 2, 669 - 680.

1991

  • Sen,S; Stefanescu,D,M, 1991, "MELTING AND CASTING PROCESSES FOR HIGH-TEMPERATURE INTERMETALLICS." JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY 43, no. 5, 30 - 34.
  • Shangguan,D; Stefanescu,D,M, 1991, "INSITU OBSERVATION OF INTERACTIONS BETWEEN GASEOUS INCLUSIONS AND AN ADVANCING SOLID LIQUID INTERFACE." METALLURGICAL TRANSACTIONS B-PROCESS METALLURGY 22, no. 3, 385 - 388.

1990

  • Tian,H,M; Stefanescu,D,M; Curreri,P,A, 1990, "INFLUENCE OF LOW-GRAVITY SOLIDIFICATION ON HETEROGENEOUS NUCLEATION IN STABLE IRON CARBON ALLOYS." METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 21, no. 1, 241 - 252.
  • Stefanescu,D,M; Upadhya,G; Bandyopadhyay,D, 1990, "HEAT TRANSFER-SOLIDIFICATION KINETICS MODELING OF SOLIDIFICATION OF CASTINGS." METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 21, no. 4, 997 - 1005.
  • Stefanescu,D,M; Moitra,A; Kacar,A,S; Dhindaw,B,K, 1990, "THE INFLUENCE OF BUOYANT FORCES AND VOLUME FRACTION OF PARTICLES ON THE PARTICLE PUSHING ENTRAPMENT TRANSITION DURING DIRECTIONAL SOLIDIFICATION OF AL/SIC AND AL/GRAPHITE COMPOSITES." METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 21, no. 1, 231 - 239.
  • Stefanescu,D,M; Bandyopadhyay,D,K, 1990, "ON THE SOLIDIFICATION KINETICS OF SPHEROIDAL GRAPHITE CAST-IRON." PHYSICAL METALLURGY OF CAST IRON IV 4, 15 - 26.
  • Bandyopadhyay,D,K; Stefanescu,D,M; MINKOFF,I; Biswal,S,K, 1990, "STRUCTURAL TRANSITIONS IN DIRECTIONALLY SOLIDIFIED SPHEROIDAL GRAPHITE CAST-IRON." PHYSICAL METALLURGY OF CAST IRON IV 4, 27 - 34.

1989

  • Stefanescu,D,M; Upadhya,G; Bandyopadhyay,D; Chen,I,G, 1989, "MODELING THE EVOLUTION OF EQUIAXED MICROSTRUCTURES IN CASTINGS." JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY 41, no. 2, 22 - 25.
  • Rana,F; Stefanescu,D,M, 1989, "FRICTION PROPERTIES OF AL-1.5 PCT MG/SIC PARTICULATE METAL-MATRIX COMPOSITES." METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 20, no. 8, 1564 - 1566.
  • Chen,I,G; Sen,S; Chen,C,H; Stefanescu,D,M, 1989, "FABRICATING AG2O-STABILIZED SUPERCONDUCTIVE WIRES." JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY 41, no. 4, 31 - 33.
  • Sen,S; Chen,I,G; Chen,C,H; Stefanescu,D,M, 1989, "FABRICATION OF STABLE SUPERCONDUCTIVE WIRES WITH YBA2CU3OX/AG2O COMPOSITE CORE." APPLIED PHYSICS LETTERS 54, no. 8, 766 - 768.

1988

  • KANETKAR,C,S; Kacar,A,S; Stefanescu,D,M, 1988, "THE WETTING CHARACTERISTICS AND SURFACE-TENSION OF SOME NI-BASED ALLOYS ON YTTRIA, HAFNIA, ALUMINA, AND ZIRCONIA SUBSTRATES." METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 19, no. 7, 1833 - 1839.
  • KANETKAR,C,S; Chen,I,G; Stefanescu,D,M; ELKADDAH,N, 1988, "A LATENT-HEAT METHOD FOR MACRO MICRO MODELING OF EUTECTIC SOLIDIFICATION." TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN 28, no. 10, 860 - 868.
  • Dhindaw,B,K; Moitra,A; Stefanescu,D,M; CURRERI,P, 1988, "DIRECTIONAL SOLIDIFICATION OF AL-NI/SIC COMPOSITES DURING PARABOLIC TRAJECTORIES." METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 19, no. 8, 1899 - 1904.
  • Curreri,P,A; PETERS,P,N; Wu,M,K; Chen,I; Stefanescu,D,M, 1988, "PROCESSING OF STRONG FLUX TRAPPING HIGH-TC OXIDE SUPERCONDUCTORS." JOURNAL OF METALS 40, no. 11, 42 - 42.
  • Kacar,A,S; Stefanescu,D,M, 1988, "WETTING CHARACTERIZATION OF SILICON-CARBIDE AND GRAPHITE SUBSTRATES BY ALUMINUM-ALLOYS." JOURNAL OF METALS 40, no. 11, 53 - 53.
  • Curreri,P,A; Lee,J,E; Stefanescu,D,M, 1988, "DENDRITIC SOLIDIFICATION OF ALLOYS IN LOW GRAVITY." METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 19, no. 11, 2671 - 2676.
  • Chen,I; Bandyopadhyay,D; Stefanescu,D,M, 1988, "SOLIDIFICATION KINETIC MODELING OF EQUIAXED DENDRITIC GROWTH." JOURNAL OF METALS 40, no. 11, 96 - 96.
  • Dhindaw,B,K; Stefanescu,D,M; Singh,A,K; Curreri,P,A, 1988, "DIRECTIONAL SOLIDIFICATION OF CU-PB AND BI-GA MONOTECTIC ALLOYS UNDER NORMAL GRAVITY AND DURING PARABOLIC FLIGHT." METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 19, no. 11, 2839 - 2846.
  • Stefanescu,D,M; Dhindaw,B,K; KACAR,S,A; Moitra,A, 1988, "BEHAVIOR OF CERAMIC PARTICLES AT THE SOLID-LIQUID METAL INTERFACE IN METAL MATRIX COMPOSITES." METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 19, no. 11, 2847 - 2855.
  • Chen,I,G; Sen,S; Stefanescu,D,M, 1988, "SUPERCONDUCTIVE ALUMINUM YBA2CU3OX COMPOSITES STABILIZED BY OXYGEN FLUORINE DONORS." APPLIED PHYSICS LETTERS 52, no. 16, 1355 - 1357.

1987

  • RAPPAZ,M; Stefanescu,D,M, 1987, "MODELING OF EQUIAXED PRIMARY AND EUTECTIC SOLIDIFICATION." JOURNAL OF METALS 39, no. 7, A62 - A62.
  • Curreri,P,A; Lee,J,E; Stefanescu,D,M, 1987, "DENDRITIC SOLIDIFICATION OF ALLOYS IN LOW GRAVITY." JOURNAL OF METALS 39, no. 10, A21 - A21.
  • Loper,C,R; Stefanescu,D,M, 1987, "DEVELOPMENT OF SOLIDIFICATION STRUCTURES IN STABLE FE-C-SI ALLOYS." JOURNAL OF METALS 39, no. 7, A61 - A61.

1986

  • Stefanescu,D,M; Curreri,P,A; Fiske,M,R, 1986, "MICROSTRUCTURAL VARIATIONS INDUCED BY GRAVITY LEVEL DURING DIRECTIONAL SOLIDIFICATION OF NEAR-EUTECTIC IRON-CARBON TYPE ALLOYS." METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 17, no. 7, 1121 - 1130.

1985

  • Stefanescu,D,M; KANETKAR,C, 1985, "MODELING OF THE SOLIDIFICATION OF CAST-IRON." JOURNAL OF METALS 37, no. 8, A42 - A42.
  • Stefanescu,D,M; Curreri,P,A; Fiske,M, 1985, "LOW-GRAVITY PROCESSING OF DIRECTIONALLY SOLIDIFIED IRON-CARBON TYPE ALLOYS." JOURNAL OF METALS 37, no. 11, A68 - A68.

1981

  • Stefanescu,D,M, 1981, "PRODUCTION OF AS-CAST FERRITIC AND FERRITIC-PEARLITIC DUCTILE IRON IN GREEN SAND MOLDS." INTERNATIONAL CAST METALS JOURNAL 6, no. 2, 23 - 32.

1980

  • Stefanescu,D,M, 1980, "PRODUCTION OF VERMICULAR GRAPHITE CAST-IRON WITH SUPERVISION AND CORRECTION OF FORM OF GRAPHITE DURING MANUFACTURE." FONDERIE 35, no. 395, 48 - 48.

1977

  • Stefanescu,D,M; CRACIUM,S, 1977, "MANGANESE AND VANADIUM CAST-IRONS WITH 15 PERCENT CHROMIUM FOR ABRASIVE WEAR RESISTANT CASTINGS." FONDERIE 32, no. 364, 51 - 60.

Papers in Proceedings

2011

  • Zhao,Hong-Lee; Zhu,Ming-Fang; Stefanescu,Doru,Michael "Modeling of the Divorced Eutectic Solidification of Spheroidal Graphite Cast Iron." in 9th International Symposium on Science and Processing of Cast Iron. STAFA-ZURICH, (1 2011). 324 - 329.
  • Boonmee,Sarum; Stefanescu,Doru,M "The Mechanism of Formation of Casting Skin in CG Iron and its Effect on Tensile Properties." in 9th International Symposium on Science and Processing of Cast Iron. STAFA-ZURICH, (1 2011). 11 - 16.
  • Pencea,Ion; Stefanescu,Doru,Michael; Ruxanda,Roxana; Anghelina,Florina,Violeta "New Aspects Regarding the Structure of Spheroidal Cast Iron Carbon Inclusions Revealed by WAXD Investigations." in 9th International Symposium on Science and Processing of Cast Iron. STAFA-ZURICH, (1 2011). 120 - 125.
  • Boonmee,S; Moran,M,K; Stefanescu,D,M "On the Effect of the Casting Skin on the Fatigue Properties of CG Iron." in 115th Annual Metalcasting Congress. SCHAUMBURG, (1 2011). 421 - 430.

2010

  • Boonmee,S; Gyesi,B; Stefanescu,D,M "Casting Skin of Compacted Graphite Iron Part I: Evaluation and Mechanism of Formation." in 114th Annual Metalcasting Congress. SCHAUMBURG, (1 2010). 205 - 216.
  • Boonmee,S; Stefanescu,D,M "Casting Skin of Compacted Graphite Iron Part II: Influence on Tensile Mechanical Properties." in 114th Annual Metalcasting Congress. SCHAUMBURG, (1 2010). 217 - 224.

2009

  • Pencea,Ion; Stefanescu,Doru,Michael; Ruxanda,Roxana; Anghelina,Violeta,Florina "NEW ASPECTS REGARDING THE WAXD INVESTIGATION OF SPHEROIDAL CAST IRON INCLUSIONS." in 20th International Danube-Adria-Association-for-Automation-and-Manufacturing Symposium. WIEN, (1 2009). 1667 - 1668.

2008

  • Stefanescu,Doru,M; Curreri,Peter,A; Sen,Subhayu "Molten materials transfer and handling on the lunar surface." in Space Technology and Applications International Forum (STAIF-2008). MELVILLE, (1 2008). 162 - 169.

2007

  • Zhu,M,F; Hong,C,P; Stefanescu,D,M; Chang,Y,A "Computational modeling of microstructure evolution in solidification of aluminum alloys." JOURNAL: "METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE." in Symposium on Simulation of Aluminum Shape Casting Processing - From Alloy Design to Mechanical Properties. (8 2007). 517 - 524.
  • Stefanescu,Doru,M "Modeling of cast iron solidification- The defining moments." JOURNAL: "METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE." in Symposium on Solidification Modeling and Microstructure Formation held at the 2006 TMS Annual Meeting. (7 2007). 1433 - 1447.
  • Stefanescu,D,M "30 years of modeling of microstructure evolution during casting solidification." in 4th International Conference on Materials and Manufacturing Technologies (MATEHN 06). STAFA-ZURICH, (1 2007). 9 - 16.

2006

  • Zhu,M,F; Hong,C,P; Stefanescu,D,M; Chang,Y,A "Advances in computational modeling of microstructure evolution in solidification of aluminum alloys." in Symposium on Simulation of Aluminum Shape Casting Processing - From Alloy Design to Mechanical Properties. WARRENDALE, (1 2006). 13 - 22.

2005

  • Stefanescu,D,M "Computer simulation of shrinkage-related defects in castings - A review." in Symposium on Shape Casting of Metals in honor of John Campbell held at the 2005 TMS Annual Meeting. WARRENDALE, (1 2005). 295 - 304.
  • Sen,S; Kar,S,K; Catalina,A,V; Stefanescu,D,M; Dhindaw,B,K "Evolution of in-situ generated reinforcement precipitates in metal matrix composites." JOURNAL: "TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS." in 2nd International Conference on Solidification Science and Processing. (8 2005). 709 - 714.

2003

  • Catalina,A,V; Stefanescu,D,M; Sen,S "Numerical calculation of the morphology of a solid/liquid interface near an insoluble particle." in 10th International Conference on Modeling of Casting, Welding and Advanced Solidification Processes. WARRENDALE, (1 2003). 125 - 132.
  • Stefanescu,D,M; Ruxanda,R; Dix,L,P "The metallurgy and tensile mechanical properties of thin wall spheroidal graphite irons." JOURNAL: "INTERNATIONAL JOURNAL OF CAST METALS RESEARCH." in 7th International Symposium on the Science and Processing of Cast Iron (SPCI7). (1 2003). 319 - 324.

2001

  • Stefanescu,D,M; Juretzko,F,R; Catalina,A,V; Sen,S; Ruxanda,R "Pushing and engulfment of reactive particles (PERP)." in International Conference on Solidification Science and Processing. ENFIELD, (1 2001). 357 - 365.
  • Stefanescu,D,M; Catalina,A,V; Juretzko,F; Mukherjee,S; Sen,S; Dhindaw,D,K "Particle engulfment and pushing micro-gravity experiments and mathematical modeling." in 1st International Symposium on Microgravity Research and Applications in Physical Sciences and Biotechnology. PARIS, (1 2001). 621 - 628.
  • Beltran-Sanchez,L; Stefanescu,D,M "A model for the multi-nodule eutectic grain microstructure evolution in spheroidal graphite iron." in International Conference on Solidification Science and Processing. Enfield NH, (1 2001). 145 - 154.

2000

  • Mukherjee,S; Stefanescu,D,M "Analysis of liquid convection effects on the pushing-engulfment transition." in Symposium on State of the Art in Cast Metal Matrix Composites in the Next Millenium at the 2000 TMS Fall Meeting. WARRENDALE, (1 2000). 89 - 100.
  • Stefanescu,D,M; Juretzko,F,R; Mukherjee,S; Catalina,A,V; Sen,S; Curreri,P,A "The physics of particle pushing and engulfment: Experimental and theoretical developments." in Space Technology and Applications International Forum (STAIF-2000). MELVILLE, (1 2000). 505 - 510.
  • Bune,A,V; Sen,S; Mukherjee,S; Catalina,A; Stefanescu,D,M "Effect of melt convection at various gravity levels and orientations on the forces acting on a large spherical particle in the vicinity of a solidification interface." JOURNAL: "JOURNAL OF CRYSTAL GROWTH." in 11th American Conference on Crystal Growth and Epitaxy. (4 2000). 446 - 451.

1999

  • Leon-Torres,J; Stefanescu,D,M; Sen,S; Curreri,P,A "Gravitational acceleration effects on macrosegregation. Experiments and computational modeling." in Symposium on Fluid Flow Phenomena in Metals Processing, at the 1999 TMS Annual Meeting. WARRENDALE, (1 1999). 467 - 474.
  • Catalina,A,V; Stefanescu,D,M "A dynamic model for the interaction between an insoluble particle and an advancing solid liquid interface." in Symposium on Solidification 1999 at the TMS Annual Meeting. WARRENDALE, (1 1999). 273 - 282.

1998

  • Guo,X; Stefanescu,D,M; Chuzhoy,L; Pershing,M,A; Biltgen,G,L "A mechanical properties model for ductile iron." in 101st Casting Congress of the American-Foundrymens-Society. DES PLAINES, (1 1998). 47 - 54.
  • Barlow,J,O; Stefanescu,D,M "Computer-aided cooling curve analysis revisited." in 101st Casting Congress of the American-Foundrymens-Society. DES PLAINES, (1 1998). 349 - 354.
  • Barlow,J,O; Owens,M; Stefanescu,D,M; Lane,A,M; Piwonka,T,S "Chemical penetration in sand molds in steel castings - AFS research." in 101st Casting Congress of the American-Foundrymens-Society. DES PLAINES, (1 1998). 325 - 331.
  • Hayes,K,D; Barlow,J,O; Stefanescu,D,M; Piwonka,T,S "Mechanical penetration of liquid steel in send molds." in 102nd Annual Meeting of the American-Foundrymen's-Society. DES PLAINES, (1 1998). 769 - 776.
  • Guo,X; Stefanescu,D,M "Solid phase transformation in ductile iron - A benchmark for computational simulation of microstructure." in 101st Casting Congress of the American-Foundrymens-Society. DES PLAINES, (1 1998). 533 - 543.
  • Stefanescu,D,M; Grugel,R,N; Curreri,P,A "In situ resource utilization for processing of metal alloys on lunar and Mars bases." in 6th International Conference and Exposition on Engineering, Construction, and Operations in Space (Space 98). NEW YORK, (1 1998). 266 - 274.

1996

  • Juretzko,F,R; Stefanescu,D,M; Dhindaw,B,K; Sen,S "Interfacial energy delta gamma - Theoretical and experimental evaluation for metal-ceramic systems." in Symposium on Cast Metal Matrix Composites - Processing, Properties, Applications at the 1996 TMS Fall Meeting. WARRENDALE, (1 1996). 21 - 31.
  • Catalina,A; Stefanescu,D,M; Chuzhoy,L "Simulation of microstructure evolution in gray cast iron." in International Symposia on Advanced Material and Technology for the 21st-Century - JIM 95 Fall Annual Meeting. WARRENDALE, (1 1996). 119 - 127.

1995

  • Nastac,L; Stefanescu,D,M; Chuzhoy,L "An analytical model for microsegregation in open and expanding domains." in 7th Conference on Modeling of Casting, Welding and Advanced Solidification Processes. WARRENDALE, (1 1995). 533 - 540.

1993

  • Nastac,L; Stefanescu,D,M "MODELING OF GROWTH OF EQUIAXED DENDRITIC GRAINS AT THE LIMIT OF MORPHOLOGICAL STABILITY." in 6TH CONF ON MODELING CASTING AND WELDING PROCESSES. WARRENDALE, (1 1993). 209 - 217.
  • Sen,S; Stefanescu,D,M; Dhindaw,B,K "MELT-PROCESSED TIC REINFORCED NI3AL MATRIX COMPOSITES." in 2nd Symposium on Solidification of Metal Matrix Composites, at the TMS-ASM Materials Week. WARRENDALE, (1 1993). 29 - 40.
  • Stefanescu,D,M "CRITICAL-REVIEW OF THE 2ND GENERATION OF SOLIDIFICATION MODELS FOR CASTINGS - MACRO TRANSPORT - TRANSFORMATION KINETICS CODES." in 6TH CONF ON MODELING CASTING AND WELDING PROCESSES. WARRENDALE, (1 1993). 3 - 20.
  • Stefanescu,D,M "ISSUES IN LIQUID PROCESSING OF PARTICULATE METAL-MATRIX COMPOSITES." in SYMP ON METAL MATRIX COMPOSITES / SYMP ON CONTINUOUS CASTING. CLAUSTHAL ZELLERFE, (1 1993). 75 - 89.
  • Stefanescu,D,M; Ahuja,S; Dhindaw,B,K; PHALNIKAR,R "MODELING OF PARTICLE DISTRIBUTION IN EQUIAXED-GRAINS METAL-MATRIX COMPOSITES." in 2nd International Conference on the Semi-Solid Processing of Alloys and Composites. WARRENDALE, (1 1993). 406 - 416.

1992

  • Nastac,L; Chang,S; Stefanescu,D,M; Hadji,L "A MODEL FOR MICROSEGREGATION IN MULTICOMPONENT SYSTEMS SOLIDIFYING WITH EQUIAXED MORPHOLOGY." in SYMP ON MICROSTRUCTURAL DESIGN BY SOLIDIFICATION PROCESSING, AT THE 1992 MATERIALS WEEK. WARRENDALE, (1 1992). 57 - 75.
  • Dhindaw,B,K; Stefanescu,D,M "EFFECT OF GRAVITY DRIVEN CONVECTION ON PARTICLE DISTRIBUTION IN CAST METAL MATRIX COMPOSITES." in 4TH INTERNATIONAL CONF ON EXPERIMENTAL METHODS FOR MICROGRAVITY MATERIALS SCIENCE RESEARCH, AT THE 121ST ANNUAL MEETING OF THE MINERALS, METALS & MATERIALS SOC. WARRENDALE, (1 1992). 109 - 113.
  • Sen,S; Dhindaw,B,K; Stefanescu,D,M "EVALUATION OF VARIOUS INTERMETALLIC MATRIX - CERAMIC PARTICLE-SYSTEMS FOR MELT PROCESSING OF METAL MATRIX COMPOSITES." in 2ND SYMP ON INTERMETALLIC MATRIX COMPOSITES. PITTSBURGH, (1 1992). 399 - 409.

1991

  • Stefanescu,D,M "THE 2ND GENERATION OF COMPUTER-MODELS FOR SOLIDIFICATION - HEAT TRANSFER-SOLIDIFICATION KINETICS (HT-SK) CODES." in 18TH ANNUAL AUTOMOTIVE MATERIALS SYMP : NUMERICAL SIMULATION OF CASTING SOLIDIFICATION IN AUTOMOTIVE APPLICATIONS. WARRENDALE, (1 1991). 69 - 97.
  • Stefanescu,D,M; Shangguan,D; VONDENBRINCKEN,P "PARTICLE ENGULFMENT AND PUSHING BY SOLIDIFYING INTERFACES (PEPSI)." in INTERNATIONAL CONF ON SOLIDIFICATION AND MICROGRAVITY. ZURICH, (1 1991). 25 - 42.
  • Kacar,A,S; Rana,F; Stefanescu,D,M "KINETICS OF GAS-TO-LIQUID TRANSFER OF PARTICLES IN METAL MATRIX COMPOSITES." JOURNAL: "MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING." in SYMP OF THE 1990 ANNUAL SPRING CONF OF THE EUROPEAN MATERIALS RESEARCH SOC - METAL MATRIX COMPOSITES. (3 1991). 95 - 100.

1990

  • Berry,J,T; Stefanescu,D,M; HILL,J,L "COMPUTER-AIDED-DESIGN FOR CASTING AND SOLIDIFICATION TECHNOLOGY." in CONF ON DESIGN AND MANUFACTURING SYSTEMS. DEARBORN, (1 1990). 575 - 579.
  • Bandyopadhyay,D,K; Stefanescu,D,M; MINKOFF,I; Biswal,S,K "STRUCTURAL TRANSITIONS IN DIRECTIONALLY SOLIDIFIED SPHEROIDAL GRAPHITE CAST-IRON." in 4TH INTERNATIONAL SYMP ON THE PHYSICAL METALLURGY OF CAST IRON. PITTSBURGH, (1 1990). 27 - 34.
  • Stefanescu,D,M; Bandyopadhyay,D,K "ON THE SOLIDIFICATION KINETICS OF SPHEROIDAL GRAPHITE CAST-IRON." in 4TH INTERNATIONAL SYMP ON THE PHYSICAL METALLURGY OF CAST IRON. PITTSBURGH, (1 1990). 15 - 26.

1989

  • MOREL,D,E; Stefanescu,D,M; Curreri,P,A "MICROGRAVITY PROCESSING OF PARTICULATE REINFORCED METAL MATRIX COMPOSITES." in 21ST INTERNATIONAL TECHNICAL CONF OF THE SOC FOR THE ADVANCEMENT OF MATERIALS AND PROCESS ENGINEERING - ADVANCED MATERIALS : THE BIG PAYOFF. COVINA, (1 1989). 678 - 687.

1988

  • Kacar,A,S; Stefanescu,D,M "WETTING CHARACTERIZATION OF SILICON-CARBIDE AND GRAPHITE SUBSTRATES BY ALUMINUM-ALLOYS." JOURNAL: "JOURNAL OF METALS." (11 1988). 53 - 53.
  • Curreri,P,A; PETERS,P,N; Wu,M,K; Chen,I; Stefanescu,D,M "PROCESSING OF STRONG FLUX TRAPPING HIGH-TC OXIDE SUPERCONDUCTORS." JOURNAL: "JOURNAL OF METALS." (11 1988). 42 - 42.
  • Chen,I; Bandyopadhyay,D; Stefanescu,D,M "SOLIDIFICATION KINETIC MODELING OF EQUIAXED DENDRITIC GROWTH." JOURNAL: "JOURNAL OF METALS." (11 1988). 96 - 96.

1987

  • Curreri,P,A; Lee,J,E; Stefanescu,D,M "DENDRITIC SOLIDIFICATION OF ALLOYS IN LOW GRAVITY." JOURNAL: "JOURNAL OF METALS." (10 1987). A21 - A21.
  • Kacar,A; Dhindaw,B,K; Stefanescu,D,M; Curreri,P,A "DIRECTIONAL SOLIDIFICATION OF SIC-AL ALLOY COMPOSITES DURING PARABOLIC TRAJECTORIES .1. SINGLE-PHASE MATRIX AL-MG-SIC COMPOSITES." JOURNAL: "JOURNAL OF METALS." (10 1987). A21 - A21.
  • Dhindaw,B,K; Singh,A,K; Stefanescu,D,M; Curreri,P,A "THE ROLE OF GRAVITY ON THE SOLIDIFICATION BEHAVIOR OF CU-PB AND BI-GA MONOTECTIC ALLOYS." JOURNAL: "JOURNAL OF METALS." (7 1987). A19 - A19.
  • Moitra,A; Dhindaw,B,K; Stefanescu,D,M; Curreri,P,A "DIRECTIONAL SOLIDIFICATION OF SIC-AL ALLOY COMPOSITES DURING PARABOLIC TRAJECTORIES .2. EUTECTIC MATRIX AL-NI-SIC COMPOSITES." JOURNAL: "JOURNAL OF METALS." (10 1987). A21 - A22.

1985

  • Stefanescu,D,M; Curreri,P,A; Fiske,M "LOW-GRAVITY PROCESSING OF DIRECTIONALLY SOLIDIFIED IRON-CARBON TYPE ALLOYS." JOURNAL: "JOURNAL OF METALS." (1 1985). A68 - A68.

1984

  • Curreri,P,A; Fiske,M; Stefanescu,D,M "THE EFFECTS OF LOW-GRAVITY DURING DIRECTIONAL SOLIDIFICATION ON THE MICROSTRUCTURE OF IRON-CARBON ALLOYS." JOURNAL: "JOURNAL OF METALS." (1 1984). 92 - 92.