Integrated Computational Materials Engineering for Welding -- Publications
Publications
Journals and conference papers
- H. Song, T. McGaughy, A. Sadek, W. Zhang, Effect of structural support on microstructure of nickel base superalloy fabricated by laser-powder bed fusion additive manufacturing, Additive Manufacturing, Vol. 26, pp. 30-40 (2019).
- Y.S. Lee, P. Nandwana, W. Zhang, Dynamic simulation of powder packing structure for powder bed additive manufacturing, The International Journal of Advanced Manufacturing Technology, Vol. 96, pp. 1507-1520 (2018).
- T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, W. Zhang, Additive manufacturing of metallic components – process, structure and properties, Progress in Materials Science, Vol. 92, pp. 112–224 (2018).
- T. Mukherjee, W. Zhang and T. DebRoy, Residual stresses and distortion in additively manufactured compositionally graded and dissimilar joints, Computational Materials Science, Vol. 143, pp. 325-337 (2018).
- T. DebRoy, W. Zhang, J. Tuner and S. S. Babu, Building digital twins of 3D printing machines, Scripta Materialia, Vol. 135, pp. 119-124 (2017).
- Y.S. Lee and W. Zhang, Modeling of heat transfer, fluid flow and solidification microstructure of nickel-base superalloy fabricated by laser powder bed fusion, Additive Manufacturing, 12 (2016) 178-188.
- T. Mukherjee, W. Zhang and T. DebRoy, An improved prediction of residual stresses and distortion in additive manufacturing, Computational Materials Science, Vol. 126, pp. 360-372 (2017).
- A. W. Prabhu, T. Vincent, A. Chaudhary, W. Zhang and S. S. Babu, Effect of microstructure and defects on fatigue behaviour of directed energy deposited Ti–6Al–4V, Science and Technology of Welding and Joining, Vol. 20, p. 659 (2015).
- Y.S. Lee and Wei Zhang, Mesoscopic Simulation of Heat Transfer and Fluid Flow in Laser Powder Bed Additive Manufacturing, In: 2015 Annual International Solid Freeform Fabrication Symposium. (Aug 2015). Austin: Laboratory for Freeform Fabrication and University of Texas at Austin. pp. 1154-1165.
Dissertations and theses
- Yi Li, Oxidation Behavior and Thermal Conductivity of Thermoelectric SnSe as well as Laser Powder Bed Fusion Process Modeling and Validation through In-situ Monitoring and Ex-situ Characterization, Ph.D. Dissertation, The Ohio State University, 2019.
- Hyeyun Song, Multi-scale Microstructure Characterization for Improved Understanding of Microstructure-Property Relationship in Additive Manufacturing, Ph.D. Dissertation, The Ohio State University, 2016.
- Yousub Lee, Simulation of Laser Additive Manufacturing and its Applications, Ph.D. Dissertation, The Ohio State University, 2015.
- Avinash W. Prabhu, Improving Fatigue Life of LENS Deposited Ti-6Al-4V through Microstructure and Process Control, MS Thesis, The Ohio State University, 2014.
Journals and conference papers
- Y. Lu, L. Walker, M. Kimchi, Wei Zhang, Microstructure and Strength of Ultrasonic Plus Resistance Spot Welded Aluminum Alloy to Coated Press Hardened Boron Steel, Metallurgical and Materials Transactions A, published online (2019).
- Y. Lu, D. D. Sage, C. Fink, W. Zhang: Dissimilar metal joining of aluminium to zinc-coated steel by ultrasonic plus resistance spot welding – microstructure and mechanical properties, Science and Technology of Welding and Joining, 2019. -- Free access courtesy of Taylor & Francis Online --
- Y. Lu, K. Zhang, J. Tran, E. Mayton, M. Kimchi, and W. Zhang, Optimizing ultrasonic plus resistance spot welding for dissimilar metal joining, Welding Journal, Vol. 98, pp. 273s-282s (2019). -- Free access courtesy of American Welding Society --
- Y. Lu, E. Mayton, H. Song, M. Kimchi, W. Zhang, Dissimilar metal joining of aluminum to steel by ultrasonic plus resistance spot welding - Microstructure and mechanical properties, Materials & Design (2019). -- Open access --
- Y. Lu, A. Peer, T. Abke, M. Kimchi, W Zhang, HAZ softening of resistance spot welded 3T dissimilar steel stack-up, Welding Journal, Vol. 98, pp. 328-s-336-s (2019). -- Free access courtesy of American Welding Society --
- Y Lu, A. Peer, T. Abke, M. Kimchi, and Wei Zhang, Subcritical heat affected zone softening in hot-stamped boron steel during resistance spot welding, Materials & Design, Vol. 155, pp. 170-184 (2018).
- T.E. Borchers, A. Seid, P. Shafer, and W. Zhang, Exacerbated Stress Corrosion Cracking in Arc Welds of High-Strength Aluminum Alloys, Welding in the World, Vol. 62, pp. 783-792 (2018). *** Henry Granjon prize 2017 winner Category B: Materials Behaviour and Weldability ***
- T.E. Borchers, A.J. Peer, and W. Zhang, Solute Enrichment in Fused-Overlap Zone of High Strength Aluminum Welds, Welding Journal, Vol. 96, pp. 229s-240s (2017).
- T. E. Borchers, D. P. McAllister and W. Zhang: Macroscopic Segregation and Stress Corrosion Cracking in 7xxx Series Aluminum Alloy Arc Welds, Metallurgical and Materials Transactions A, Vol. 46A, p. 1827 (2015).
- T. E. Borchers, A. Seid, S. S. Babu, P. Shafer and W. Zhang: Effect of filler metal and post-weld friction stir processing on stress corrosion cracking susceptibility of Al–Zn–Mg arc welds, Science and Technology of Welding and Joining, Vol. 20, p. 460 (2015).
- Y. Lu, A. Peer, T. Abke, M. Kimchi, W. Zhang, Heat-Affected Zone Microstructure and Local Constitutive Behaviors of Resistance Spot Welded Hot-Stamped Steel, In: Sheet Metal Welding Conference XVII, Livonia, MI, October 19-22, 2016.
Dissertations and theses
- Ying Lu, Resistance and Ultrasonic Spot Welding of Light-Weight Metals, Ph.D. Dissertation, The Ohio State University, 2018.
- Andrea J. Peer, Performance Testing and Modeling of Ultra-High Strength Steel and Complex Stack-Up Resistance Spot Welds, MS Thesis, The Ohio State University, 2017.
- Tyler E. Borchers, Weldability and Corrosion of 7xxx Series Aluminum Alloys, Ph.D. Dissertation, The Ohio State University, 2016.
Journals and conference papers
- X. Cai, Y. Gao, X. Wang, W. Zhang, W. Liu, X. Shen, W. Zhang, Z. Yu, Z. Feng, Triaxial Constraint and Tensile Strength Enhancement in Brazed Joints, Metallurgical and Materials Transactions A, Vol. 51, pp. 5587–5596 (2020).
- D. H. Bechetti, J. K. Semple, W. Zhang, C. R. Fisher, Temperature-Dependent Material Property Databases for Marine Steels - Part 1: DH36, Integrating Materials and Manufacturing Innovation, Vol. 9, pp. 257-286 (2020).
- Y. M. Zhang, Y. P. Yang, W. Zhang, S. J. Na, Advanced Welding Manufacturing – A Brief Analysis and Review of Challenges and Solutions, Journal of Manufacturing Science and Engineering, Vol. 142, p. 110816 (2020).
- D. Sorensen, J.C. Myers, B. Li, W. Zhang, E. Hintsala, D. Stauffer, A.J. Ramirez, Optimization of A Dissimilar Platinum to Niobium Micro-Resistance Weld: A Structure-Processing-Property Study, Journal of Materials Science (2019).
- D. J. Tung, D. W. Mahaffey, O. N. Senkov, S. L. Semiatin, and W. Zhang, Transient behaviour of torque and process efficiency during inertia friction welding, Science and Technology of Welding and Joining, Vol. 24, pp. 136-147 (2019).
- O. Senkov, D. Mahaffey, D. Tung, W. Zhang, and S. Semiatin, Efficiency of the Inertia Friction Welding Process and its Dependence on Process Parameters, Metallurgical and Materials Transactions A, Vol. 48A, pp. 3328-3342 (2017).
Dissertations and theses
- Daniel J. Tung, A Comprehensive Understanding of Machine and Material Behaviors during Inertia Friction Welding, Ph.D. Dissertation, 2017.
- Tyler K. Payton, On the Improvement of Creep-fatigue Behavior of Grade 91 Weldments, MS Thesis, 2017.
- Kaiwen Zhang, Experimental and Computational Investigation of Temper Bead Welding and Dissimilar Metal Welding for Nuclear Structures Repair, MS Thesis, 2016.