IML Publications
Book Chapters
Chapter Name, Book | Authors | Year |
---|---|---|
"Use of Vaporizing Foil Actuator for Impact Welding of Aluminum Alloy Sheets with Steel and Magnesium Alloys", Light Metals | Liu, B., Vivek, A., & Daehn, G. S. | 2015 |
“Machine Tool” Entry in World Book Encyclopedia, revision in use 2007 and beyond. | G.S. Daehn | 2007 |
“Effect of Load Redistribution in Transient Plastic Flow” | W Gan, P.H Zhang, R.H. Wagoner, G.S. Daehn | 2006 |
“Grain Boundary Precipitate Modification for Improved Intergranular Corrosion Resistance" | K.A. Unocic, P. Kobe, M.J. Mills, G.S. Daehn | 2006 |
“Co-Continuous Composite Materials for Friction and Braking Applications” | G.S. Daehn and M.C. Breslin | 2006 |
"High Velocity Metal Forming" | G.S. Daehn | 2005 |
"Formability of Sheet Steel in High Velocity Impact” | M. Seth, V.J. Vohnout and G.S. Daehn | 2005 |
“Transient Plastic Flow at Nominally Fixed Structure Due to Load Redistribution” | W. Gan, P. Zhang, R.H. Wagoner and G.S. Daehn | 2005 |
"Prediction of Limit Strains in Superplastic Materials" | M.P. Miles, G.S. Daehn and R.H. Wagoner | 2003 |
"Observations on the Densification of Al-Al2O3 Composite Powder Compaction by Pressure Cycling" | G. Jiang, G. S.Daehn and R. H. Wagoner | 2003 |
“Deformation Mechanisms During Creep of Titanium Alloys at Low Temperature” | M. J. Mills, T. Neeraj, M. F. Savage and G. S. Daehn | 2002 |
"Explicit Finite Element Method Simulation of Consolidation of Monolithic and Composite Powders" | X.J. Xin, P. Jayaraman, G. Jiang, R.H. Wagoner and G.S. Daehn | 2002 |
"Effect of Cyclic Compaction on the Uniformity of Metal Matrix Composites" | Y. Fu, J. J. Lannutti, R. H. Wagoner and G. S. Daehn | 2002 |
"A Scaling Analysis of Recovery Creep" | G. S Daehn, H. Brehm and B-S Lim | 2002 |
"A Model for Slip Creep Based on Sub-Structural Coarsening" | H. Brehm and G.S. Daehn | 2002 |
"A Framework for Modeling Creep in Pure Metals" | H. Brehm and G. S. Daehn | 2002 |
"Inclusion Particle Size Effects on the Cyclic Compaction of Powder Composites" | G. Jiang, G. S. Daehn and R. H. Wagoner | 2001 |
"Effects of Lubrication and Aspect Ratio on the Consolidation of Metal Matrix Composites under Cyclic Pressure" | G.Jiang, G. S. Daehn, J. J. Lannutti, Y. Fu and R. H. Wagoner | 2001 |
"Modeling Thermally Activated Deformation with a Variety of Obstacles and its Application to Creep Transients" | G. S.Daehn | 2001 |
"Void Filling and Cluster Breaking of Metal-Ceramic Composites Under Pressure Cycling" | G. Jiang, G. S. Daehn and R. H. Wagoner | 2001 |
"Primary Creep Transients due to Non-Uniform Obstacle Sizes" | G. S. Daehn | 2001 |
"Experimental and Numerical Investigations of Idealized Solid State Consolidation" | W. Wu, G. Jiang, R. H. Wagoner and G. S. Daehn | 2000 |
"Phenomenological and Microstructrual Analysis of Room Temperature Creep in Titanium Alloys" | T. Neeraj, D-H Hou, G. S. Daehn and M. J. Mills | 2000 |
"Effects of Zn additions on the grain boundary precipitation and corrosion of Al-5083" | Carroll MC, Gouma PI, Mills MJ, et al. | 2000 |
"Thermal Cycling and Related Strain Mismatch in Metal Matrix Composites" | G. S. Daehn | 2000 |
"Experimental and Numerical Examination of Idealized Powder Compaction under Cyclic Pressure" | G. Jiang, W. Wu, G.S. Daehn and R. H. Wagoner | 2000 |
"Improved Formability with Electromagnetic Forming: Fundamentals and a Practical Example" | G. S. Daehn, V. J. Vohnout and L. DuBois | 1999 |
"Hyperplastic Forming: Process Potential and Factors Affecting Formabilitiy" | G. S. Daehn, V. J. Vohnout and S. Datta | 1999 |
"A Hybrid Quasi-Static-Dynamic Process for Increased Limiting Strains in the Forming of Large Sheet Aluminum Parts" | V. J. Vohnout, G. S. Daehn and R. Shivpuri | 1999 |
"Effects of Minor Sc and Zr Additions on Commercial Al-Mg-Mn Alloys" | M.C. Carroll, M. J. Mills G. S. Daehn, P. I. Gouma, M. F. Savage and B. R. Dunbar | 1999 |
"A Model of Creep Based on Interacting Elements and its Application to the Primary Creep of Fully-Lamellar g-TiAl" | Glenn S. Daehn, G. B. Viswanathan, Michael J. Mills and V. K. Vasudevan | 1999 |
Conference Papers
Conference Paper Title | Authors | Year |
---|---|---|
"A Vision of Numerically Controlled, Autonomous Manufacturing and Metal Forming”. Forming the Future. The Minerals, Metals & Materials Series. Springer. | Daehn, G., Cao, J., Kinsey, B., Tekkaya, E., Vivek, A., Yoshida, Y. | 2021 |
"Augmentation of Plasma-Based Impulse Generation with Rapid Chemical Reactions". Forming the Future. The Minerals, Metals & Materials Series. Springer. |
B. Thurston, Y. Mao, T. Lewis, A. Vivek and G. S. Daehn, Cao, J., Kinsey, B., Tekkaya, E., Yoshida, Y. (eds) | 2021 |
"Electrically Driven Plasma via Vaporization of Metallic Conductors: A Novel Tool for Joining Tubular Workpieces" | A. Vivek, C. Weddeling, M. Hahn, G. S. Daehn, A. E. Tekkaya | 2014 |
“Vaporizing Foil Actuator Welding of AA6061 with Cu110: Effect of Heat Treatment Cycles on Mechanical Properties and Microstructure” | A. Vivek, S. R. Hansen, B. C. Liu and G. S. Daehn | 2014 |
“Vaporizing Foil Actuator: Controlling the Pressure Pulse for Impulse Metalworking” | S. R. Hansen, A. Vivek and G. S. Daehn | 2014 |
“An Electromagnetically Driven Metalworking Press“ | G. A. Taber, B. A. Kabert, A. T. Washburn, T. N. Windholtz, C. E. Slone, K. N. Boos and G. S. Daehn | 2012 |
“Laser Impact Welding - Process Introduction and Key Variables” | H. Wang, D. Liu, G. Taber, J. C. Lippold, G. S. Daehn | 2012 |
“Rapidly Vaporizing Conductors Used for Impulse Metalworking” | G. Taber, J.R. Johnson, G.S. Daehn | 2012 |
“A TEM Study of Creep Deformation Mechanisms in AllVac 718 Plus” | Raymond R. Unocic, Kinga A. Unocic, Robert W. Hayes, Glenn S. Daehn, and Michael J. Mills | 2010 |
"Impact Welding in a Variety of Geometric Configurations” | Y. Zhang, H. Wang. S. Babu and G. S. Daehn | 2010 |
“Agile Production of Sheet Metal Aviation Components Using Disposable Electromagnetic Actuators” | S. Woodward, C. Weddeling, G. S. Daehn, V. Psyk, W. Carson and E. Tekkaya | 2010 |
“Dimensional Control and Formability in Impact Forming” | S. Srinivasan, H. Wang, G. Taber and G. S. Daehn | 2010 |
“Commercialization of Fuel Cell Bipolar Plate Manufacturing by Electromagnetic Forming” | J. Shang, L. Wilkerson, S. Hatkevich and G. S Daehn | 2010 |
“Pressure Heterogeneity in Small Displacement Electrohydraulic Forming Processes” | V. J. Vohnout, G. K. Fenton and G. S. Daehn | 2010 |
“Shock-less High Rate Compaction of Porous Brittle Materials” | G. Fenton, T. Caipen, G. Daehn T. Vogler and D. Grady | 2009 |
“Experimental Study and Numerical Simulation of Magnetic Pulsed Welding for Pre-Flanged AA6061-T6 and Cu101 Sheets” | Y. Zhang, G. S. Daehn, P. L'Eplattenier and B. Suresh | 2009 |
“Low-Cost Manufacturing of Fuel Cell Bipolar Plates by Electromagnetic Forming” | J. Shang, L. Wilkerson, S. Hatkevich, G. S. Daehn, S. Srinivasan, H. Wang and J. R. Bradley | 2009 |
"High Strain Rate Constitutive Relations and Ductility Parameters via Electromagnetic Launch and Velocimetry” | J. R. Johnson, G. K. Fenton, G. Taber, A. Vivek and G. S. Daehn | 2009 |
“Dynamic Characterization of Granular Materials” | G. Fenton, G. S. Daehn, G. Taber, T. Vogler, and D. Grady | 2009 |
“Springback Elimination in Structural Components by Means of Electromagetic Forming” | Leire Vadillo, Iaki Prez, Iaki Egua, M. A. Gοngeles Gutirrez, Beatriz Gonzlez, Uwe Paar, Glenn S. Daehn | 2009 |
"Coupling Experiment and Simulation in Electromagnetic Forming Using Photon Doppler Velocimetry” | Jason R. Johnson, Geoff Taber, Anupam Vivek, Yuan Zhang, Scott Golowin, Kristin Banik, Gregg K. Fenton, and Glenn S. Daehn | 2009 |
“TEM Sample Preparation Method for Grain Boundary Phase Identification in Al-Mg alloys” | G.S. Daehn and K.A. Unocic | 2008 |
“Material Constitutive Parameter Identification Using an Electromagnetic Ring Expansion Experiment Coupled with LS-DYNA and LS-OPT” | I. Henchi, P. Leplattenier, G. S. Daehn, Y. Zhang, A. Vivek and N. Stander | 2008 |
“Numerical Simulation and Experimental Study for Magnetic Pulse Welding Process on AA6061-T6 and Cu101 Sheet” | Y. Zhang, P. Leplattenier, G. Taber, A. Vivek, G. S. Daehn and S. Babu | 2008 |
“Flanging and Hemming Auto Body Panels using Electromagetic Forming” | P. Jimbert, I. Eguia, M. A. Gutierrez, B. Gonzalez, G. S. Daehn, Y. Zhang, R. Andersson, H. Sundberg, S. O. Olsson, P. Bronnstrom | 2008 |
“Hemming of Aluminum Sheet Panels Using the Electromagnetic Forming Technology” | P. Jimbert et. al. | 2007 |
"Agile Sheet Metal Forming: Basic Concepts and the Role of Electromagnetic Metal Forming" | G.S. Daehn | 2007 |
“Efficiency Improvement and Analysis of Microstructure Associated with Use of a Uniform Pressure Actuator” | P. Jimbert, A. Arroyo, I. Eguia, J. I. Fernandez, E. Silveria, I Garuz and G. S. Daehn | 2006 |
“Introduction of an Electromagnetism Module in LS-DYNA For Coupled Mechanical-Thermal-Electromagnetic Simulations” |
P. Leplattenier, G. Cook, C. Aschraft, M. Berger, A. Shapiro, G. S. Daehn and M. Seth |
2006 |
“Design, Construction, and Applications of the Uniform Pressure Electromagnetic Actuator” | Manish Kamal, Vincent Cheng, John Bradley, Steve Hatkevich, Glenn S. Daehn | 2006 |
“New Approach for Springback Correction: Electromagnetic Impulses” | E. Iriondo, B. Gonzlez, M. A. Gutirrez, G. S. Daehn | 2006 |
“Replication of Microfeatures by Electromagnetic Launch and Impact” | M. Kamal, V. Cheng, T.K. Sue, J. Shang and G.S. Daehn | 2006 |
“Electromagnetic Springback Reshaping” | E. Iriondo, B. Gonzalez, M. Gutierrez, V. Vonhout, G. Daehn, B. Hayes | 2006 |
“Experimental Study of Spingback Elimination Using Electromagnetic Forming” | Edurne Iriondo, Betriz Gonzalez, Iaki Eguia, Marian Gutirrez, Glenn Daehn | 2005 |
"Effect of Aspect Ratio on High Velocity Formability of Aluminum Alloy" | M. Seth and G.S. Daehn | 2005 |
“Analysis of the Electromagnetic Impulse Joining Processes With a Field Concentrator” | P. Zhang, S.Yushanov, G.S. Daehn | 2004 |
"Improved Formability by Control of Strain Distribution in Sheet Stamping Using Electromagnetic Impulses" | V.J. Vohnout, J Shang, G.S. Daehn | 2004 |
"Improved Crimp-joining of Aluminum Tubes onto Mandrels with Undulating Surfaces" | I. Eguia, P. Zhang, G.S. Daehn | 2004 |
“Electromagnetically Assisted Sheet Forming: Enabling Difficult Shapes by Controlled Energy Distributions” | G. S. Daehn, J. Shang and V. J. Vohnout | 2003 |
"Spot Impact Welding of Sheet Aluminum" | A. Turner, P. Zhang, V.J. Vohnout and G.S. Daehn | 2002 |
"Primary Creep in Polycrystalline Alpha-Titanium: Coupled Observations and a Stochastic Cellular Automaton Model" | N. Thirumalai, M.F. Savage, M. J. Mills and G. S. Daehn | 2001 |
"Tribiological behaviour of Al-20%Si/Al2O3 high reinforcement content composites produced by a displacement reaction" | L. Ceschini, M.C. Breslin, G.S. Dahen, G.L. Garagnani, G. Poli | 1998 |
"Modeling of Electromagnetically Formed Sheet Metal" | G. K Fenton and G. S. Daehn | 1998 |
Peer-reviewed Journal Papers
Recent Publications (full list)
Year | Publication in peer-reviewed journals |
---|---|
2022 |
|
2021 |
|
2020 |
|
2019 |
|
2018 |
|
2017 |
|
2016 |
|
2015 |
|
2014 |
|
2013 |
|
2011 |
|
2010 |
|
2008 |
|
2007 |
|
2006 |
|
2005 |
|
2004 |
|
2003 |
|
2002 |
|
1998 |
|
Theses
Thesis/Dissertation Title |
Author | Year |
---|---|---|
Vaporizing Foil Actuator Process Parameters: Input Characteristics, Energy Deposition, and Pressure Output |
Steven Hansen | 2017 |
Effect of geometrical parameters on pressure distributions of impulse manufacturing technologies |
Ryan C. Brune | 2016 |
Joining dissimilar structural alloys by vaporizing foil actuator welding : process conditions, microstructure, corrosion, and strength |
Bert C. Liu | 2016 |
Developing the Axisymmetric Expanding Ring: A High Strain-Rate Materials Characterization Test | Jason R. Johnson | 2013 |
Laser Impact Welding and High Strain Rate Embossing | Huimin Wang | 2013 |
The Constitutive Behavior of Copper at High Strain Rate as Determined by the Free Ring Expansion Ring Test | Shweta Gupta | 2013 |
The Effect of a Field Shaper on Electromagnetic Forming of Aluminum Tubes | David Backus | 2013 |
Rapid Vaporization of Thin Conductors Used for Impulse Metalworking | Anupam Vivek | 2012 |
Plane-Strain Formability of Sheet Metal at High Velocity | Timothy N. Windholtz | 2012 |
High Strain Rate Consolidation and Forming of Armstrong and HDH Titanium Power and Sheet Material | Bradley A. Kabert | 2011 |
Springback Calibration of Sheet Metal Components Using Impulse Forming Methods | Steven T. Woodward | 2011 |
Structure-Composition-Property Relationships In 5xxx Series Aluminum Alloys | Kinga A. Unocic | 2008 |
Advanced Processing Techniques For Co-Continuous Ceramic Composites | Jonathan S. Evarts | 2008 |
Path Actuators for Magnetic Pulse Assisted Forming and Punch-less Electro-Magnetic Shearing | Scott M. Golowin | 2008 |
Ractors Effecting Electromagnetic Flat Sheet Forming Using the Uniform Pressure Coil | Kristin E. Banik | 2008 |
Electromagnetically Assisted Sheet Metal Stamping | Jianhui Shang | 2006 |
High Velocity Formability and Factors Affecting It | Mala S. Dehra | 2006 |
A Uniform Pressure Electromagnetic Actuator for Forming Flat Sheets | Manish Kamal | 2005 |
Joining Enabled by High Velocity Deformation | Peihui Zhang | 2003 |
Spot Impact Welding of Aluminum Sheet | Anthony J. Turner | 2002 |
Category: Research