Quantification of Susceptibility to Ductility-Dip Cracking in Austenitic Alloys
Sponsors: AWS Foundation, voestalpine Böhler
In-kind support: AZZ Specialty Welding, Electric Power Research Institute
Effect of HAZ Phase Transformations and Microstructure on the Creep Behavior in Grade 91 and 92 Steel Welds
Sponsors: American Electric Power, Electric Power Research Institute
Standardization of the Transvarestraint Test
Sponsors: Electric Power Research Institute, IHI Japan
Cracking of Duplex Stainless Steel Welds in Reactor Effluent Air Coolers (REACs)
Group of sponsors, collaboration with the Southwest Research Institute.
Cold Metal Transfer Weld Overlays for Nuclear Power Application: Metallurgical Characterization, Weldability Evaluation, and Computational Modeling
Sponsors: Areva, AZZ WSI, Babcock & Wilcox Canada, Böhler Welding Group, Electric Power research Institute. In-kind support: ESI North America, Fronius Austria
Evaluation of the Cracking Susceptibility in Grade T/P23 and T/P24 Steel Welds for Power Generation Applications
Sponsor: Alstom Power, American Electric Power, Babcock & Wilcox, Böhler Welding Group, ESAB AB, Vallourec & Mannesmann Tubes
Development of Qualification Test for Susceptibility to Hydrogen Assisted Cracking in Dissimilar Metal Welds for Subsea Service under Cathodic Protection
Sponsor: ExxonMobil Corporation
Development of Standardized Screening and Qualification Tests for Resistance to Hydrogen Cracking in Dissimilar Metal Welds during Subsea Service under Cathodic Protection
Sponsor: Shell Int'l Exploration & Production Inc.
Embrittlement Mechanisms in the Fusion Zone of Alloy 625 Weld Deposit on Steel 8630
Sponsor: BP America Inc., Shell, Total
Tempering Response in Grade 91 Steel Weld Metal and HAZ, and Compositional Optimization of Grade 91 Welding Consumable
Sponsors: American Electric Power, Babcock & Wilcox, voestalpine Böhler
Optimization of SMAW Consumable for Grade 91 Creep Strength Enhanced Ferritic Steel in Power Generation Applications
Sponsors: American Electric Power, Babcock & Wilcox, ESAB AB
Metallurgical Characterization of Armor Alloys for Development and Optimization of Induction Bending Procedures
