ACRL Publications

A. Annerino, K. Narvaez, L. Joseph, L.C. Klein, and P.I Gouma, “Evaluating melting gel coatings for wearable metabolic sensors”, Smart Health, in print, 2022.
M. Pawar and P.I. Gouma, “Intercalation-assisted massive phase transformation: The key to SHS synthesis?”, J. Am. Ceram. Soc., 105(12), 7159-7170, 2022.
A. Annerino, M. Lawson, and P.I. Gouma, “Future Insights on High-Temperature Ceramics and Composites for Extreme Environments”, Int. J. Ceram. Sci. Eng,, 4(5), 296-301, 2022.
A. Annerino, M. Faltas, M. Srinivasan, and P.I. Gouma, “Towards skin-acetone monitors with selective sensitivity: Dynamics of PANI/CA films”, Plos one, 17(4), e0267312, 2022
T. Gilmore and P.I. Gouma, “Polymorphic Biological and Inorganic Functional Nanomaterials”, Materials, 15, 5355, 2022.
A. Haynes and P.I. Gouma, “Perspective-Conducting Polymer Hybrids as Diagnostic Chemosensors”, J. Electrochem. Soc., 169, 037513, 2022.
E. Hessick, M. Pawar, R. Souchereau, E. Schmitz, and P.I. Gouma, “Novel, Inexpensive, and Scalable Amyloid Fibril Formation Method”, (invited), Materials, 16, 1766, 2022.
X. Jia, D. Jiang, and P.I. Gouma, “Facile Synthesis of Self-Supported WO₃/PANI hybrid photocatalyst for methylene blue degradation under visible light”, Materials Letters, 131869, 2022.
M. C. Exline. A. Stanacevic, A.S. Bowman, and P.I. Gouma, “Exhaled nitric oxide detection for diagnosis of COVID-19 in critically-ill patients”, PloS one, 16(10), e0257644, 2021.
O. O. Abe , Z. Qiu, Z. Chen, J. R. Jinschek and P.-I. Gouma, “Effect of crystallite size on the low-temperature solid-solid phase transformations in the WO₃ system”, Ceramics International, 47(23) 33476-33482, 2021.
A. Annerino and P.I. Gouma, “Future Trends in Semiconducting Gas-Selective Sensing Probes for Skin Diagnostics”, Sensors, 21, 7554, 2021.
O. O. Abe , Z. Qiu , J. R. Jinschek and P.-I. Gouma, “Effect of (100) and (001) Hexagonal WO3 Faceting on Isoprene and Acetone Gas Selectivity” Sensors 2021, 21, 5, 1690. https://doi.org/10.3390/s21051690
M. Zhang, W. Lu, P. I. Gouma, Z. Xu, L. Wang, “Theoretical Prediction of Effective Stiffness of Nonwoven Fibrous Networks with Straight and Curved Nanofibers”, Composites Part A: Applied Science and Manufacturing available online 2021, 143, 106311, https://doi.org/10.1016/j.compositesa.2021.106311
Z. Qiu, C.-H. Li, J. R. Jinschek, P.-I. Gouma, “Low temperature synthesis of metastable tetragonal yttria doped hafnia T-(Y-HfO₂) nanoparticles through mechanochemical processing and annealing”, Ceramics International, 47(10), 14208-14215, 2021.
Z. Qiu, O. Abe, P.I. Gouma, J. Jinschek, “Determination of Polymorph Structures in Functional Metal Oxides using Convergent Beam Electron Diffraction”, Microscopy and Microanalysis, 26 (S2), 244-247, 2020.
P. I. Gouma, F. Mikaeili, J. Lee, Y. Karimi and M. Stanacevic, “Sensing device for breath biomarker detection”, IEEE International Symposium on Olfaction and Electronic Nose (ISOEN), 1-3, 2019
G. Jodhani, F. Mikaeili, and P. Gouma, “Flame Spray Synthesis of VOPO₄polymorphs”, Frontiers in Materials, 6, 254, 2019.
Y. Karimi, Y.Lin, G. Jodhani, M. Stanacevic, and P.-I. Gouma, "Single exhale biomarker breathalyzer", Sensors, 19(20) 270, 2019
M. Zhang, Y. Chen, F.-P. Chiang, P.I. Gouma, and L. Wang, "Modeling the large deformation and microstructure evolution of non-woven polymer fiber networks", J. Applied Mechanics, 86(1), 011010, 2019
M. Pawar, S.T. Sendogdular, and P. Gouma, " A brief Overview of TiO₂ photocatalyst for organic dye remediation: Case study of reaction mechanisms involved in Ce-TiO₂photocatalysis system", (invited) J. of Nanomaterials, 5953609, 2018.
P. I. Gouma, " Isoprene sensor/breathalyzer for monitoring sleep disorders", pp. 55-56, 17th International Meeting on Chemical Sensors - IMCS 2018, DOI 10.5162/IMCS2018/PT1, 2018
O.O. Abe, G. Jodhani, and P.I. Gouma, "Ferrochromic WO₃ nanoparticles for metabolic sensors", pp. 765-766, 17th International Meeting on Chemical Sensors - IMCS 2018, DOI 10.5162/IMCS2018/P2EM.10, 2018
F. Mikaeili and P.I. Gouma, “Super Water-Repellent Cellulose Acetate Mats”, Scientific Reports, 8: 12472, 2018.
F. Mikaeili, S. Topcu, G. Jodhani, and P.I. Gouma, “Flame-sprayed Pure and Ce-Doped TiO₂ Photocatalysts”, Catalysts, 8, 342, 2018.
O.O. Abe, G. Jodhani, P. Gouma. “On the coupled ferroelectric-electrochromic effect of ε-WO3” Journal of American Ceramic Society, v.101 (1), 2018
P.I. Gouma, L Wang, S.R. Simon, M. Stanacevic. " Novel Isoprene Sensor for a Flu Virus Breath Monitor" Sensors 17(1) 2017
C. Han, A.P. Bhagwat, P.I. Gouma. “ Oleophilic nanofibrous mats of cellulose acetate”, International journal of innovative and applied research v. 5(6) 2017 p 9-20
G. Jodhani and P. I.Gouma. "Flame Spray Pyrolysis Processing to Produce Metastable Phases of Metal Oxides," JOJ Materials Science, v.1, 2017.
G. Jodhani, J. Huang, P. Gouma. "Flame Spray Synthesis and Ammonia Sensing Properties of Pure α-MoO3 Nanosheets," Journal of Nanotechnology, 2016.
S. Topcu, G. Jodhani and P. Gouma, "Optimized Nanostructured TiO2 Photocatalysts", Fontiers in Materials: Functional Ceramics, 3(35), 2016
M. Mojtabavi, G. Jodhani, R. Rao, J. Zhang and P. Gouma, " A PANI–Cellulose acetate composite as a selective and sensitive chemomechanical actuator for acetone detection", Advanced Device Materials, 2(1), pp. 1-7, 2016
S. Sood, K. Kisslinger, and P. Gouma, “Nanowire Growth by an Electron-Beam-Induced Massive Phase Transformation”, J. Am. Ceram. Soc., 97(12), pp. 3733-3736, 2014.
J. Lee, S. Divya, P. Shanmugasundaram, and P. I. Gouma, “Synthesis and Characterization of Visible-Light Activated CuO-TiO2 Nanofibrous Mats”, Journal of Nanoengineering and Nanomanufacturing, 4(2), pp. 140-145 (6), 2014
J. Lee and P.I. Gouma, “Flame-Spray-Processed CuO-WO₃ Nanopowders as Photocatalysts”, J. Am. Ceram. Soc., 97(12). Pp. 3719-3720, 2014.
S. Sood, S. Divya, and P. Gouma, “High Throughput Electrospinning of 3D Nano Fibrous Mats”, Journal of Nanoengineering and Nanomanufacturing, 4(1), pp. 39-44 (6), 2014.
P.I. Gouma and J. Lee, “Photocatalytic Nanomats Clean Up Produced Water from Fracking”, Transl. Mater. Res., 1, 025002, 2014 (http://iopscience.iop.org/2053-1613/1/2/025002/pdf/2053-1613_1_2_025002.pdf)
S. Sood and P. Gouma "Polymorphism in nanocrystalline binary metal oxides” Nanomaterials and Energy, 2(NME2), 1-15, 2013.
S. Sood and P. Gouma "Polymorphic Phase Transitions in Nanocrystalline Binary Metal Oxides", J. Am. Ceram. Soc., 96 [2], 351-354, 2013.
J. W. Gardner, K.C. Persaud, P. Gouma, and R. Gutierrez-Osuna, "Guest Editorial-Special issue on Machine Olfaction", IEEE Sensors Journal 12(11), 3105-3107(NOV 2012)
P. Gouma, R. Xue, C.P. Goldbeck, P. Perrotta, and C. Balazsi, “Nano-hydroxyapatite-Cellulose Acetate Composites for Growing of Bone Cells” Mater. Sci, & Eng C., 2012.
P. Gouma, “Nanoscale Polymorphic Oxides for Selective Chemosensors”, Science of Advanced Materials, 3(5), pp. 787-793, 2011.
P. Gouma, A. Prasad and M. Stanacevic, “A Selective Nanosensor Device for Exhaled Breath Analysis”, J. Breath Res., 5 (3), p. 037110, 2011.
P. Gouma, “Revolutionizing Personalized Medicine with Nanosensor Technology”, Personalized Medicine, 8(1), pp. 16-16, 2011.
J. Lee and P.I. Gouma, “Tailored 3D CuO Nanogrid Formation”, J. Nanomaterials, in print 2011 (online access: http://www.hindawi.com/journals/jnm/2011/863631.html).
L. Wang, K. Kalyanasundaram, M. Stanacevic, and P. Gouma, “Nanosensor Device for Breath Acetone Detection”, Sensor Letters, 8, (1-4), 2010.
P. Gouma, K. Kalyanasundaram, X. Yun, M. Stanacevic and L. Wang, “Chemical sensor and breath analyzer for ammonia detection in exhaled human breath”, IEEE Sensors, Special Issue on Breath Analysis, 10 (1), pp. 49-53, 2010.
C. Balazsi, A. Bishop, J.H.C. Yang, K. Balazsi, F. Weber, and P.I. Gouma, “Biopolymer-Hydroxyapatite Scaffolds for Advanced Prosthetics”, Composite Interfaces, 16(2-3), pp. 191-200, 2009.
I.M. Szilagyi L.S. Wang, P.I. Gouma, C. Balazsi, J. Madarasz, and G. Pokol, “Preparation of hexagonal WO₃ from hexagonal ammonium tungsten bronze for sensing NH₃”, Materials Research Bulletin, 44(3), pp. 505-508, 2009.
P.I Gouma and K. Kalyanasundaram, “A Selective Nanosensing Probe for Nitric Oxide”, Appl. Phys. Lett. 93, 244102, 2008.
A. S. Haynes and P.I. Gouma, “Electrospun Conducting Polymer-based Sensors for Advanced Pathogen Detection”, IEEE Sensors Journal, 8(6), pp. 701-70, June 2008.
L. Wang, A. Teleki, S.E. Pratsinis, and P.I. Gouma, “Ferroelectric WO₃ Nanoparticles for Acetone Selective Detection”, Chem. Mater., 20(15), pp. 4794-4796, 2008.
C. Balazsi, L. Wang. E.O. Zayim, I.M. Szilagyi, I.Miklos, K. Sedlackova, J. Pfeifer A.L. Toth, and P.I. Gouma, “Nanosize hexagonal tungsten oxide for gas sensing applications”, J. Eur. Ceram. Soc., 28(5), pp. 913-917, 2008.
K. Ramachandran and P.I. Gouma, "Electrospinning for Bone Tissue Engineering", Recent Patents on Nanotechnology, 2(1), pp. 1-7, 2008.
D. Rubenstein, D. Han, S. Goldgraben, E. El-Gendi, P. I. Gouma and M.D. Frame, “Bioassay chamber for angiogenesis with perfused explanted arteries and electrospun scaffolding”, Microcirculation, 14 (7), pp. 723-737, 2007.
K. Sahner, P. Gouma, and R. Moos, “Electrodeposited and sol-gel precipitated p-type SrTi_1-xFe_xO₃-delta semiconductors for gas sensing”, Sensors, 7(9), pp. 1871-1886, 2007.
A. Bishop-Haynes and P. Gouma, “Electrospun polyaniline composites for NO₂ detection”, Materials and Manufacturing Processes, 22 (5-6), pp. 764-767, 2007.
U. Wang, J. Pfeifer, C. Balaszi, and P.I. Gouma, “Synthesis and Sensing Properties to NH₃ of hexagonal metastable nanopowders” Materials and Manufacturing Processes, 22 (5-6), pp. 773-776, 2007.
G. Wang, Y. Ji, L.H. Zhang, Y.M. Zhu, and P.I. Gouma, “Synthesis of Molybdenum Oxide Nanoplatelets during Crystallization of the Precursor Gel from It’s Hybrid Nanocomposites”, Chemistry of Materials, 19(5), pp. 979-981, 2007.
Cs. Balázsi, K. Kalyanasundaram, E.O. Zayim, J. Pfeifer, A,L. Tóth and P.I. Gouma, “Nanosize tungsten oxide for electrochromic and sensing applications realized by soft chemical routes, Acta Metallurgica Slovaca, 13, pp.186-190 (2007).
S.Y. Gadre and P. Gouma, “Biodoped Ceramics: Synthesis, Properties And Applications”, J. Amer. Ceram. Soc. - Invited Feature Article, 89 (10), pp. 2987-3002, 2006.
P. Gouma, A. Bishop and K.K. Iyer, “Single Crystal Metal Oxide Nanowires as Bio-Chem Sensing Probes”, Rare Metal Materials Engineering, 35, pp. 295-298, 2006.
K. Kalyanasundaram and P.I. Gouma, “Processing and Characterization of Nanostructured Metal Oxides for Gas Sensing Applications”, Transactions of the IEE of Japan-Transactions on Sensors and Micromachines (Section E), Invited Paper, vol. 126-E, No. 10, pp. 560-567, 2006.
P. Gouma, K. Kalyanasundaram, and A. Bishop, “Electrospun Single Crystal MoO₃ Nanowires for Bio-Chem sensing probes”, Journal of Materials Research, Nanowires and Nanotubes special issue, 21(11), pp. 2904-2910, 2006.
M. Karadge, Y-W. Kim and P I. Gouma, “Synergistic precipitation strengthening in TiAl alloys”, Applied Physics Letters, 89(18), art. No. 181921, 2006.
A. Bishop, Cs. Balazsi, J. Yang and P. Gouma, “Biopolymer-Hydroxyapatite composite coatings prepared by electrospinning”, Polymers for Advanced Technologies, 17(11-12), pp. 902-906, 2006.
D. Han and P. I. Gouma, “Electrospun Bio-Scaffolds that Mimic the Topology of Extracellular Matrix”, Nanomedicine: , 2, pp. 37-41, 2006.
P.I. Gouma, A. K. Prasad, and K.K. Iyer, “Selective Nanoprobes for `Signaling Gases`”, Nanotechnology, 17, pp. S48-S53, 2006.
A. Teleki, S.E. Pratsinis, K. Kalyanasundaram (Iyer), and P.I. Gouma, “Sensing of organic vapors by flame-made TiO₂ nanoparticles”, Sensors Act. B, 119(2), pp. 683-690, 2006.
K. Sawicka and P. I. Gouma, “Electrospun composite nanofibers for functional applications”, J. Nanoparticle Research, 8(6), pp. 769-781, 2006.
G.A. Wang, Y.A. Ji, X.R. Huang, X.Q. Yang, P.I. Gouma, and M. Dudley, “fabrication and characterization of polycrystalline WO₃ nanofibers and their application for ammonia sensing”, J. Phys. Chem. B, 110(47), pp. 23777-23782, 2006.
K.M. Sawicka, A.K. Prasad and P.I. Gouma, “Metal Oxide Nanowires for Use in Chemical Sensing Applications”, Sensor Letters (3), pp. 1-5, 2005.
A. Bishop and P. Gouma, “Leuco-emeraldine based polyaniline-poly-vinyl-pyrrolidone electrospun composites and bio-composites: a preliminary study of sensing behavior”, Rev. Adv. Mater. Sci, 10 pp. 34-40, 2005.
P. Gouma, “Nanostructured Oxide-based Selective Gas sensor Arrays for Chemical Monitoring and Medical Diagnostics in Isolated Environments”, Habitation Journal, vol. 10 (2), pp. 99-104, 2005.
K. M. Sawicka, P. Gouma, and S. Simon, “Electrospun Bio-composite Nanofibers for Urea Biosensing”, Sensors Act. B, 108 (1-2), pp. 585-588, 2005
M. Karadge and P.I. Gouma, “A structural aspect of a(a₂) -> lamellar a₂+g transformation in g-TiAl”, Phil. Mag. Lett., 84 (7), pp. 451-459, 2004.
M. Karadge and P. I. Gouma, “Metastable phase formation during a₂ (D0₁₉) to g (L1₀)- transformation in as-atomized g-TiAl alloy powders”, Applied Physics Letters, 85(21), pp. 4914-4916, 2004.
L. Kovarik, P.I. Gouma, C. Kisielowski, S.A. Court, and M. J. Mills, “A HRTEM study of metastable phase formation in Al-Mg-Cu alloys during artificial aging”, Acta Mater., 52 (9), pp. 2509-2520, 2004.
P. Gouma, S. Simon, P. Jha, and K.M. Sawicka, “Bio-composite Oxides for Resistive Detection of Pathogens”, Chemical Sensors, 20, suppl. B, pp. 72-73, 2004.
P.I. Gouma, “Controlling Gas Selectivity through Polymorphic Selection for Metal Oxide Chemical Detectors”, Chemical Sensors, 20, suppl. B, pp. 186-187, 2004.
M. Jaime Vasquez, G. P. Halada, C.R. Clayton, and P.I. Gouma, “Fabrication of Nano-structured Al₂CuMg Thin Films by Femtosecond Pulsed Laser Ablation”, Thin Solid Films, 458 (1-2), pp. 37-42, 2004.
J. Bai, M. Dudley, B. Raghothamachar, P. Gouma, B.J. Skromme, L. Chen, P.J. Hartlieb, E. Michaels and J. Kolis, “Correlated Structural and Optical Characterization of Ammonothermally-Grown Bulk GaN”, Appl. Phys. Lett., 84 (17), pp. 3289-3291, 2004.
P. I. Gouma, "Nanostructured Polymorphic Oxides for Advanced Chemosensors", Rev.Adv. Mater. Sci., 5, pp. 123-138, 2003.
A.K. Prasad, D. Kubinski, and P. I. Gouma, “Comparison of Sol-Gel and RF Sputtered MoO₃ Thin Film Gas Sensors for Selective Ammonia Detection", Sensors & Actuators B, 9, pp.25-30, 2003.
A.K. Prasad, P.I. Gouma, D. J. Kubinksi, J.H. Visser, R.E. Soltis, and P.J. Schmitz, "Reactively Sputtered MoO₃ films for ammonia sensing", Thin Solid Films, 436, pp. 46-51, 2003.
A.K. Prasad, P.I. Gouma, "MoO₃ and WO₃ based thin film conductimetric sensors for automotive applications", J. Mat. Sci, 38(21), pp. 4347-4352, 2003, (Invited Paper, Special Issue on Sensors).
H.W. Zhou, B. G. Kharas, and P.I. Gouma, “Microstructure of thick polycrystalline silicon films for MEMS applications”, Sensors & Act. A, 104 (1), pp. 1-5, 2003.
P.I. Gouma and M. Karadge,”In-situ observation of carbide and silicide precipitation in C+Si alloyed g-TiAl”, Materials Letters, 57 (22/23), pp. 3581-3587, 2003.
M. Karadge, Y-W. Kim, and P. I. Gouma, “Precipitation Strengthening in K5 series g-TiAl alloyed with Silicon and Carbon”, Metall. Mater. Trans., 34A, pp. 2129-2137, 2003.
X. Xu, R. P. Vaudo, G. R. Brandes, J. Bai, P. I. Gouma, and M. Dudley, “Chemical mechanical polishing for decoration and measurement of dislocations on freestanding GaN wafers”, Phys. Stat.Sol., 0 (7), pp. 2460-2463, 2003.
Y. L. Soo, G. Kioseoglou, S. Kim, Y. H. Kao, P. Sujatha Devi, J. Parise, R. J. Gambino, and P. I. Gouma, "Local Environment Surrounding Magnetic Impurity Atoms in a Structural Phase Transition of Co-Doped TiO₂ Nanocrystal Ferromagnetic Semiconductors", Appl. Phys. Lett. , 81, pp.655-657, 2002.
T. Ramgopal, P. I. Gouma, and G. S. Frankel, “Role of Grain Boundary Precipitates and SDZ on the Intergranular Corrosion of Aluminum Alloy AA7150”, Corrosion, 58, 687, 2002.
S. Karthikeyan, G.B. Viswanathan, P. I. Gouma, V. K. Vasudevan, Y-W. Kim, and M. J. Mills, “Mechanisms and effect of microstructure on creep of TiAl-based alloys”, Mat. Sci. Eng. A, 329, pp.621-630, Special Issue on Structural Intermetalics, Jun 2002.
P. I. Gouma, D. J. Lloyd, and M. J. Mills, “Precipitation Processes in Al-Mg-Cu Alloys”, Mater. Sci. Eng., A319-321, pp. 439-442, 2001.
M. C. Carroll, P. I. Gouma, G. S. Daehn, and M. J. Mills, “Effects of Minor Cu Additions on a Zn-modified Al-5083 Alloy”, Mater. Sci. Eng., A319-321, pp. 425-428, 2001.
P. I. Gouma and M. J. Mills, “Anatase to Rutile Transformation in Titania Powders”, J. Am. Ceram. Soc., 84 [3], pp. 619-622, 2001.
J. L. Searles, P.I. Gouma, and R. G. Buchheit, “Stress Corrosion Cracking of Sensitized AA5083 (Al-4.5Mg-1.0Mn)”, Metall. and Mater. Trans, 32A, pp. 2859-2867, Nov. 2001.
J. E. Kertz, P.I. Gouma, and R. G. Buchheit, “ Localized Corrosion Susceptibility of Al-Li-Cu-Mg-Zn Alloy AF/C458 Due to Interrupted Quenching from Solutionizing Temperatures”, Metall. and Mater. Trans. , 32A, pp. 2561-2573, Oct. 2001.
P. I. Gouma, M. J. Mills and K. H. Sandhage, “The Fabrication of Free-Standing Titania-based Gas Sensors by the Oxidation of Metallic Titanium Foils”, J. Am. Ceram. Soc., 83(4), pp. 1007-1009, 2000.
M. C. Carroll, P. I. Gouma, M. J. Mills, G. S. Daehn, and B. R. Dunbar, “Effects of Zn additions on the grain boundary precipitation and corrosion of Al-5083”, Scripta Mater., 42(4), pp. 335-340, 2000.
P. I. Gouma, P. K. Dutta, and M. J. Mills, “Structural Stability of Titania Thin Films”, Nanostructured Materials, 11(8), pp. 1231-1237, 1999.
P. K. Dutta, A. Ginwalla, B. Hogg, B. R, Patton, B. Chwieroth, Z. Liang, P. Gouma, M. Mills, and S. Akbar, “Interaction of Carbon Monoxide with Anatase Surfaces at High Temperatures: Optimization of a Carbon Monoxide Sensor”, J. Phys. Chem. B, 103, pp. 4412-4422, 1999.
P.I. Gouma, M.J. Mills, and Y-W. Kim, “Characterization of the Precipitation Process in a TiAl-based Alloy with Carbon and Silicon Additions”, Phil. Mag. Lett, 78 (1), pp.59-66, 1998.
P. I. Gouma, S. A. Akbar, and M. J. Mills, “Microstructural Characterization of Sensors based on Electronic Ceramic Materials”, JOM, 50 (11), presented as JOM-e, Nov. 1998.
P. I. Gouma, K. Subramanian, Y-W. Kim, and M. J. Mills, “Annealing studies of g-titanium aluminides alloyed with light elements for creep strengthening”, Intermetallics, 6, pp. 689-693, 1998.
P. I. Gouma, S. J. Davey, and M.H. Loretto, “Microstructure and Mechanical Properties of a TiAl-based Powder Alloy Containing Carbon”, Mat. Sci. & Eng., 241 (1-2), pp.151, 1998.
P.I. Gouma, S. Davey, M. A, Ashworth, P.A. Blenkinsop, and M. H. Loretto, “Heterogeneities in Cold Crucible Melted and Gas Atomised TiAl-based Alloys”, Powder Metallurgy, 40 (2), pp. 135-138, 1997.
P.I. Gouma, N. Saunders and M.H. Loretto, "Microstructural Evolution and Microsegregation of Gas-atomised Powders of a TiAl-based Alloy", Materials Science and Technology: MST, 12, pp. 823-829, Oct. 1996.
B. White, A. Deakin, P. I. Gouma, and R. Rada, “The Evolution of a University Research Department Facilitated by a Groupware System (MUCH)-An extended Study-Part I”, Leadership and Organization Development Journal, 18 (4,), Sept. 1997.
A.G. Deakin, P.-I. Gouma, and R. Rada, “The Plan-Facilitator and the Plan-Document”, Journal of Intelligent Systems, 4(1-2), pp. 83-111, 1994.
A. Michailidis, R. Rada, and P. I. Gouma, “A Study of Efficiency in Computer-Supported Collaborative Writing”, Journal of Intelligent Systems, 4 (1-2), pp. 133-162, 1994.

M. Pawar and P. Gouma, “Chevrel Phase compound nanomaterials synthesis via ultra-fast self-propagating high temperature synthesis reaction”, International Symposium on Self-Propagating High-Temperature Synthesis, volume XV, 2019.
S. Soon and P.I. Gouma, "Polymorphic reactions and in-situ single crystal metal oxide nanowire formation in TEM", MS&T 2018, pp.770-776, 2018.
G. Jodhani and P.-I. Gouma, "Self-organized 3D networks of tetragonal; CuFe₂O₄", MS&T 2018, pp.692-692, 2018.
P.I. Gouma, M. Alkhader, and M. Stanacevic, “Metabolic Rate Monitoring and Weight Reduction/Management”, Engineering in Medicine and Biology Society (EMBC), 36^th Annual Conference of the IEEE, 26-30 Aug 2014, pp. 3184-3187, IEEE, 2014 (http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6944299)
S. Sood, G. Zheng, and P. Gouma, “High Throughput Synthesis of Ceramic Nanofibers”, MRS Proc. Vol. 1659, MRS 2014
P. Gouma, S.Sood "3-sensor Array for Hand Held Breath Diagnostic Tool",. MRS Online Proceedings Library / Volume 1522 / (2013)
Y. Lin, P. Gouma and M. Stanacevic, “A low-power wide-dynamic-range readout IC for breath analyzer system”, 2013 IEEE International Symposium on Circuits and Systems (ISCAS), May 19-23, 2013.
P. Gouma and M Stanacevic, “Selective Nanosensor Array Microsystem for Exhaled Breath Analysis”, Procedia Eng., 25, pp. 1557-1560, 2011.
A. Ambre, M. Stanacevic, and P. Gouma, “Handheld Numerical Prototype for Breath Analyzing Sensor”, AIP Conf > Proc. 1362, 159, 2011.
P.I. Gouma, K. Ramachandran, M. Firat, M. Connolly, R. Zuckermann, Cs. Balaszi, P. L. Perrotta, and R. Xue, “Novel Bioceramics for Bone Implants”, Advances in Bioceramics and Porous Ceramics II, eds. R. Narayan, P. Colombo, D. Singh, and J. Salem, Wiley, 2010.
L. Wang, J. Pfeifer and P. I. Gouma, “Synthesis and sensing property of hexagonal WO₃ metastable nanopowders, ACUN-5 Proceedings (UNSW Sydney Australia), pp.524-528, 11-14 July 2006.
A. Bishop and P. Gouma, “Self Assembly in Biologically Synthesized Electrospun Electroactive Polymers, “Electroresponsive Polymers and Their Applications”, edited by V. Bharti, Y. Bar-Cohen, Z.-Y. Cheng, Q. Zhang, J. Madden, Materials Research Society Symposia Proceedings, v. 889, 0889-W01-06, Warrendale, PA, 2006
A. Bishop, D. Kubinski, and P. Gouma, “Polyaniline Based Hybrids for NH₃ Sensing” Proceedings of the 11th International Meeting on Chemical Sensors, IMCS-11, Brescia, Italy, 2006.
A. Bishop and P. Gouma, “Electrospun Polyaniline Composites for NO₂ Detection”, Proceedings of the ACUN-5 International Composites Conference: Advanced, Infrastructure, Natural and Nanocomposites, (UNSW Sydney Australia), 2006.
K. K. Iyer, A. K. Prasad, P. I. Gouma, “A smart medical diagnostic tool using resistive sensor technology”, in Materials and Devices for Smart Systems II, edited by Y. Furuya, J., Su, I. Takeuchi, V. K. Varadhan, J. Ulicny, (Mater. Res. Soc. Symp. Proc. 888, Warrendale, PA, 0888-V10-10, 2006.
G. Wang, X. Huang, M. Dudley, and P.I. Gouma, “Electrospun tungsten oxide nanofibers: fabrication and characterization”, Proc. “Nanostructured Materials and Hybrid Composites for Gas Sensors and Biomedical Applications”, eds. P. Gouma, D. Kubinski, E. Comini, and V. Guidi, Materials Research Society, Warrendale, PA, in print, 2006.
P. I. Gouma, A. Bishop, K. K. Iyer, “Single Crystal Metal Oxide Nanowires as Bio-Chem Sensing Probes”, Proceedings of the 6^th East Asia Conference on Chemical Sensors. Guilin, China, 2005.
A. Bishop and P. Gouma, "Electrospun bio-nano-composites for electronic pathogen detection devices", Proceedings of the International Conference on Bio-Nano-Informatics (BNI) Fusion, 2005.
A. Bishop, C.S. Balazsi, and P. Gouma, “Hydroxyapatite Biocomposite Coatings Prepared by Electrospinning for Advanced Prosthetics”, Proceedings of the 8th International Symposium on Polymers for Advanced Technologies, 2005.
D. Han, S. Goldgraben, M. D. Frame and P.I. Gouma, “ A novel nanofiber scaffold by electrospinning and its utility in microvascular tissue engineering”, Proc. Mat. Res. Soc. Symp., Vol. 845, Warrendale, Pa, 2005 (in print).
A. K. Prasad and P. Gouma, “ Nanostructured Sensor Arrays for Bio-Chemical Detection”, Ceramic Nanomaterials and Nanotechnology III, Ceramic Transactions, Volume 159, Eds. Songwei Lu, Michael Z. Hu, and Yury Gogotsi, in print, 2004.
A.K. Prasad, S. Gadia, and P. I. Gouma, “ Gas Sensor Arrays Using Nanostructured Thin Films of Molybdenum and Tungsten Oxides”, Microsc. Microanal. 10 (Suppl 2), pp. 18-19, 2004 (invited).
M. Karadge and P. I. Gouma, “On the mechanism of fine lamellar structure formation in g-TiAl powders”, ”, Microsc. Microanal. 10 (Suppl 2), pp. 314-315, 2004.
K. Sawicka, M. Karadge and P. I. Gouma, “Oxidation synthesized CuO nanowires for gas sensing applications', ”, Microsc. Microanal. 10 (Suppl 2), pp. 360-361, 2004.
K. Sawicka, P. Gouma, and S. Simon, “Electrospun Biocomposite Nanofibers for Biosensing”, in Chemical Sensors VI: Chemical and Biological Sensors and Analytical Methods, Eds: C. Bruckner-Lea, G. Hunter, N. Miura, P. Vanysek, M. Egashira, and F. Mizutani, ECS, pp. 354-358, 2004.
K. M. Sawicka, A.K. Prasad, S. Gadia, and P.I. Gouma, “Processing and Characterization of Nanostructured Metal Oxides and Nanocomposites for Use in Chemical Sensing Applications“, Proc. 2^nd AIST Int. Workshop on Chemical sensors, pp. 41-49. (Advanced Manufacturing Research Institute, Nagoya, Japan), 2004 (invited).
P. Jha, A.K. Prasad, K. M. Sawicka, and P. I. Gouma, “nanostructured Materials for Sensors”, Proc. Int. Conf. on Nanomaterials: Synthesis, Characterization and Application, Kolkata, India, Eds. S. Badyopadhyay et al, Tata McGraw-Hill Publishing Company, pp. 105-112, 2004 (invited).
P. Jha and P.I. Gouma, “ Synthesis of bio-doped oxides for urea sensing”, Proc. IEEE Sensors 2004 Conference, in print, 2004.
J. Bai, G. Dhanaraj, P. Gouma, M. Dudley, and M. Mynbaeva, “Porous SiC for HT chemical sensing devices: an assessment of its thermal stability”, Materials Science Forum, 457-460 (II), pp. 1479-1482, 2004.
P. Gouma, E. Comini, and G.Sberveglieri, ^”Sol-gel processed MoO₃ and WO₃ thin films for use as selective chemosensors”, Proc. of SPIE, Int. Symp. on “Microelectronics, MEMS and Nanotechnology”, vol. 5275, Eds: D.V. Nicolau, U.R. Miller and J.M. Dell, pp. 68- 75 , 2004.
M. Karadge, Y-W. Kim and P I. Gouma, “a₂ decomposition and H-carbide/z-silicide precipitate evolution in precipitation strengthened FL g-TiAl”, Gamma Titanium Aluminides 2003, Eds: Y-W. Kim, H Clemens and A H Rosenberger, 2003 TMS Annual Meeting and Exhibition, San Diego, California, March 2-6, pp. 437-442, 2003.
P.I. Gouma, M. Karadge, and Y-W. Kim, “Precipitation strengthening of fully lamellar gamma TiAl alloyed with carbon and Silicon”, Invited paper, Materials Science Forum, 426-4, 4635-4640, 2003.
M. Karadge and P I. Gouma, “Observation of structural modulations and formation of H-carbide and z-silicides during a₂ to g transformation in fully lamellar g-TiAl”, Mat. Res. Symp. Proc., Defect properties and related phenomena in intermetallic alloys, Eds : E.P. George, H. Inui, M.J. Mills, G. Eggeler, vol. 753, pp 209-215, 2003.
H. Zhou and P. I. Gouma, “Microsructure of thick polycrystalline Si films for MEMS applications”, Proc. Microscopy and Microanalysis 2002, Eds: E. Voelkl, D. Piston, R. Gauvin, AJ Lockley, GW Bailey and S. McKernan, Cambridge University Press, 2002.
L. Kovarik, P. I. Gouma, C. Kisielowski, S.A. Court, and M. J. Mills, “High Resolution Transmission Electron Microscopy Study of the Early Stages of Aging in Al-Mg-Cu Alloys”, Materials Science Forum, 396-402 (2), pp. 845-850, 2002.
J.L. Searles, P. I. Gouma, and R.G. Buchheit, “Stress Corrosion Cracking of Sensitized AA5083 (Al-4.5Mg-1.0Mn)”, Materials Science Forum, 396-4, pp. 1437-1442, 2002.
P. I. Gouma, S. Banerjee, and M. J. Mills, “TiO₂-based Gas Sensors as Thick or Thin Films: An Evaluation of the Microstructure”, in Ceramic Transactions: Dielectric Ceramic Materials, vol.100, pp. 419-428, 1999.
P. Thamboon, S. Yao, P. Gouma, and S. A. Akbar, “Solid Electrolyte-Based NO_x Sensors”, Ceram. Trans..A, pp. 221-230, 1999.
P.I. Gouma, K. Subramanian, Y-W. Kim, and M.J. Mills, “Precipitation and Creep Strengthening Mechanisms in K5 Series g-TiAl Alloys”, in High Temperature Ordered Intermetallic Alloys VIII, MRS Symp. Proc. Series, vol. 552, Eds. E. P. George, M. J. Mills, and M. Yamaguchi, KK2.11.1-KK2.11.6, 1999.
P.I. Gouma and M.H. Loretto, "Electron Microscopy Studies of Gas-Atomised and HIPped Powders of Ti-48Al-2Mn-2Nb", in Institute of Physics Conference Series, vol. 147, ed. D. Cherns, Univ. of Birmingham, U.K., pp. 507-510, 12-15 Sept. 1995.
P.I. Gouma, M.H. Loretto, S. Davey, M.A. Ashworth, and P.A. Blenkinsop, " The Effects of HIP Processing in Ti-48Al-2Mn-2Nb Gas-atomised Powders", Proc. of the International Conference on Hot Isostatic Pressing, Andover, Massachusetts, p. 243-248, 20-22 May 1996.
P.I. Gouma and M. H. Loretto, "The Microstructure of a TiAl-based Alloy Produced by the Ingot and Powder-Route", Proc. of the Conf. Titanium '95: Science and Technology, eds. P. A. Blenkinsop, W. J. Evans, and H. M. Flower, Birmingham, UK, p. 550-557, 1995.
P.I. Gouma and M. H. Loretto, "Analytical Electron Microscopy of a Carbon-Containing Atomised TiAl-based Alloy", Proc. of the Conf. EUREM'96, 26-30 August, Dublin, Ireland, 1996.
P. I. Gouma and M. J. Mills, “Electron Microscopy of TiO₂-based Thick Films of Gas Sensors”, in Institute of Physics Conference Series, vol. 153, Ed. J. M. Rodenburg, pp. 491-494, Cambridge, UK, 2-5 Sept. 1997.
S. Banerjee, P. I. Gouma, and M. J. Mills, “Microstructural Characterization of Annealed Samples of Pure Yttria using Electron Microscopy”, Proc. Microscopy & Microanalysis Conference, vol 3, suppl. 2, pp. 723-724, Cleveland, OH, Aug. 10-14, 1997.
M. H. Jacobs, A. L. Dowson, P. I. Gouma, and M. H. Loretto, “Induction Cold Crucible Melting and Pouring of Titanium Alloys for Spray Forming and Gas Atomised Powder Production”, International Congress of Electromagnetic Processing of Materials, Paris, Vol.1, pp. 243-248, May 26-29, 1997.

F. Mikaeili, O. Abe, P.I. Gouma, (2022). High Throughput Electrospinning Technologies and Applications (Book Chapter), Advances in technology and Applications, ASM international ASM Handbook Volume 23A, Additive Manufacturing in Biomedical Applications, in print, expected Sept 2022
O. Abe, F. Mikaeili, P.I. Gouma, (2022). Selective Sensors for Volatile Biomarkers (Book Chapter), Volatile Biomarkers for Human Health; From Nature to Artificial Senses, Royal Society of Chemistry, October, 2022
P. I. Gouma, “isoprene sensor/breathalyzer for monitoring…sleep disorder”, Amer. Ceram. Soc. Bulletin, 98(4), 28-29, 2019.
D. Han and P. I. Gouma, “Electrospun Bioscaffolds That Mimic the Topology of Extracellular Matrix”, in book “Nanomedicine in Cancer”, ed. L. P. Balogh, PAN STANFORD PUBLISHING PTE LTD, Singapore, pp. 159-169, 2017.
J. Huang, Y. Li, S. Sood, and P.I. Gouma, “Breath Biomarker Detection by Chemical Sensors”, in book "Semiconductor-based Sensors", eds. Fan Ren and Stephen J Pearton, World Scientific Publishing Co., pp. 355-392, 2017 (ISBN 978-981-3146-72-3).
L. Wang and P. Gouma, “Selective Microstructure Synthesis and Sensing Dependencies: a WO3 study”, in Metal Oxide Nanomaterials for Chemical Sensors, eds. M. A. Carpenter, Sanjay Mathur, and Andrei Kolmakov, Springer, NY, 2013.
J. Lee and P.I. Gouma, “Sol-Gel Processed Oxide Photocatalysts”, in “Sol-gel Processing for Conventional and Alternative Energy”, Advances in Sol-gel Derived Materials and Technologies”, eds. M. Aparicio et al, Springer, NY, 2012.
P. Gouma, “Nanoceramic Sensors for Medical Applications” Amer. Ceram. Soc. Bulletin, 91(7) pp. 26-32, 2012
“Olfaction and Electronic Nose: Proceedings of the 14th International Symposium on Olfaction and Electronic Nose”, Ed. P. Gouma, AIP Conf. Proc., No 1362, NYC, May 2011.
A.M. Azad and P.I. Gouma, “Functional Cboneeramic Nanofibers vis Electrospinning”, Encyclopedia on Nanoscience and Nanotechnology, ed. H.S. Nawla, ASP, vol 14, pp. 301-329, 2011.
“Functional Materials and Nanostructures for Chemical and Biochemical Sensing”, eds. E. Comini, P. Gouma, and L. Torsi, Materials Research Society, Warrendale, PA, 2010.
P. Gouma, Nanomaterials for Chemical Sensors and Biotechnology, Pan Stanford Publishing, 2009.
A. Haynes and P. Gouma, “Polyaniline Based Environmental Gas Sensors”, in Sensors for Environment, Health, and Security, NATO Science for Peace and Security Series, ed. Baraton, M.I., pp. 451-459 2009.
C. Balazsi, S. Sedlackova, J. Pfeifer, A.L. Toth, E. O. Zayim, I.M. Szilagyi, L. ang, K. Kalyanasundaram, and P.I. Gouma, “Synthesis and Examination of Hexagonal Tungsten Oxide Nanocrystals for Electrochromic and Sensing Applications”, in Sensors for Environment, Health, and Security, NATO Science for Peace and Security Series, ed. Baraton, M.I., pp. 7-91 2009.
K. Kalyanasundaram and P.I. Gouma, “Nanostructured Metal Oxides and their Hybrids for Gas Sensing Applications”, book chapter for “Science and Technology of Chemiresistive Gas Sensors” series, vol.1 “Chemiresistors”, ed. D.K. Aswal, Nova Science Publisher, New York, USA, 2008.
P. Gouma and S.E. Pratsinis, Guest Editors of the “Journal of Nanoparticle Research: An Interdisciplinary Forum for Nanoscale Science and Technology”, Special Focus: Nanomaterials for Biochemical Sensors, Vol 8 (6), 2006.
P. Gouma, “Electronic Olfaction and Taste Systems”- Invited contribution -McGraw Hill 2006 Yearbook of Science & Technology, McGraw Hill, NY, pp. 113-115, 2006.
C.R. Clayton, G.P. Halada, and P. Gouma, “Microscopy and Microspectroscopy of Aluminum and Ferrous Alloys and their Surface Treatments”, chapter to appear in “Analytical and Mechanical Characterization of Aluminum”, D.S. MacKenzie and G. E. Totten (eds.), Taylor & Francis, pp. 607-639, Boca Raton, Fl, 2006.
“Nanostructured Materials and Hybrid Composites for Gas Sensors and Biomedical Applications”, eds. P. Gouma, D. Kubinski, E. Comini, and V. Guidi, Materials Research Society, Warrendale, PA, in print, 2006
P. Gouma, Guest Editor of MRS Bulletin Special Issue, October 2004.
P. Gouma and G. Sberveglieri, “Novel Materials and Applications of Electronic Noses and Tongues”, MRS Bulletin, 29 (10), pp. 697-700, 2004.
“Silicon Carbide 2004-Materials, Processing and Devices”, vol. 815, Eds: M. Dudley, P. Gouma, T. Kimoto, P.G. Neudeck, and S. E. Saddow, Materials Research Society, Warrendale, PA, Spring 2004.
A. Michailidis, P.-I. Gouma, and R. Rada, “Applying Groupware Technologies to Support Management in Organizations”, Artificial Intelligence in Industrial Decision Making, Control, and Automation, Spyros Tzafestas and Henk Verbruggen (eds.), Kluwer, pp. 723-755, 1995.

ACRL Publications

Referred Journal Articles

Link List